Nimonic 80A alloy bar

Specifications Nimonic 80A alloy bar

stype: wire, strip, bar, pipe, sheet

Grade: Inconel 600, 625, 718, X-750, Hastelloy B, C276, INCOLOY800

Special alloy    
stype: wire, strip, bar, pipe, sheet
Grade: Inconel 600, 625, 718, X-750, Hastelloy B, C276, INCOLOY800

Product Category		Specification(mm)		Grade
Heat-resisting Superalloy Anticorrosion Alloy	Hot-rolled Bar	diameter (length of side)	Φ10~85 , 30~85	FN-2,RA333, A-286,V-57,Inconel706, Incoloy901,Incoloy903, Incoloy907, HastelloyX,Inconel600, Inconel625,HastelloyC-4, HastelloyB,HastelloyC-276,Inconel718,R26,Nimonic80A,Nimonic90,Nimonic93,Nimonic105,Nimonic118,Rene41,InconelX-750,C263, U720Li,Waspalloy,Hastelloy188,Hayness-25,BAT-45Y,AHB-300,GMR-235D,B-1900,In100,Rene100,In713C,TRW-VIA,In738,X-40,Incoloy800,Incoloy800H,Incoloy825,Alloy 20cb3,Inconel 600,Inconel 690,Hastelloy B,Hastelloy B-2,Hastelloy C,C276,Hastelloy C-4,Inconel 625
	Forged Bar	diameter (length of side)	Φ 90~250
	Hot-rolled Sheet	thickness×width×length	5.0~8.0×650~700×1000~2000
	Cold-rolled Sheet	thickness×width×length	0.8~4.0×700~1000×400~2000
	Cold-drawn -Steel	diameter             hexagon length of side	Φ8.0~35.0                     S 8.0~32.0
	Forged Shaft	diameter (length of side)	Φ 200~450
	Forged Disc	diameter (length of side)	Φ500~1000×≥100
	Forged Die Block	length of side mm	200~500
Precision Alloy	Cold-rolled Strip	thickness×width	0.03~3.0×≤300	Alloy1,AMS7717B,Alloy 3,Type 2,Alloy 4,Alloy 4,FeCrCo250,AMS5221C,ASTM F15,ASTM F29
	Hot-rolled Bar	diameter (length of side)	21~55
	Hot-rolled Flat Steel	thickness×width	3.5~13×≤300, 8~20×≤450
	Cold-drawing Wire	diameter (length of side)	0.1~8.0

  Nimonic 80A (UNS N07080)    
Nimonic 80A Chemaical composition:

Alloy	%	Ni	Cr	Fe	Mn	Si	P	S	Al	Ti	C	Co	B	Zr	Cu
80A	Min.	Balance	18						1.0	1.8
	Max.		21	3.0	1.0	1.0	0.02	0.015	1.8	2.7	0.1	2.0	0.008	0.15	0.2

Nimonic 80A Physical properties:

Density	8.19 g/cm3
Melting point	1320-1365°C

Nimonic 80A minimum mechanical properties in the room temperature :

Status	Tensile strength Rm N/mm2	Yield strength RP0.2N/mm2	Elongation A5 %
Nimonic 80A	930	620	20

Similar Specification
UNS N07080,
NA 20,
BS 3076, HR1, HR201, HR401, HR601
ASTM B637,
Werkstoff Nr. 2.4631 and 2.4952,
AFNOR NC 20TA,
NIMONIC Alloy 80A,
MSRR 7095 and MSRR 7011,
AECMA Pr EN 2188, 2189, 2190, 2191, 2396 and 2397,
VAT80A, Characteristic as below:
A nickel-chromium alloy similar to NIMONIC alloy 75 but made precipitation hardenable by additions of aluminum and titanium. The alloy has good corrosion and oxidation resistance and high tensile and creep-rupture properties at temperatures to 1500°F (815°C).
Used for gas-turbine components (blades, rings, and discs), bolts, tube supports in nuclear steam generators, die-casting inserts and cores, and exhaust valves in internal-combustion engines.  

HY (Shanghai & Hong Kong) Industry Co., Ltd