Product description
Products:
MSP676-2 generator magnetic speed sensor uses electromagnetic induction principle to achieve speed, in front of the sensor coil is wound, when the gears rotate, changing the sensor coil by the magnetic field lines, producing periodic voltage in the sensor coil by the voltage handle count, you can measure the speed of the gear. The use of stainless steel sensor housing, the output signal of strong anti-jamming performance, easy to install, can be used in smoke, gas, water, gas and other harsh environments.
Product performance and features:
1, can be replaced, but the basic functions are similar.
2, MSP can replace all the sensors, the difference in the thread with the hole, but the basic functions are similar.
3, prominent features: can be used in smoke, gas, water, gas and other harsh environments.
4, the selling point: the output signal is strong, anti-jamming performance.
Specifications:
1, operating voltage range: 4 ~ 24 V
2, the maximum current is: 2 A
3, the output waveform: approximation (when ≥50r / min) sine wave
4, the output signal amplitude: 50r / when min ≥300mv (sensor core and test the gear tooth tip clearance δ = 0.5 ~ 1.2mm measured gear modulus m = 2 gear Z = 60 material electrical steel)
5, measuring range: 50 ~ 5000Hz
6, the use of time: continuous use
7, the working environment: Temperature -20 ~ + 60 ℃ -20 ~ + 160 ℃ (special order)
8, the output in the form of: two-wire
9, Dimensions: Diameter M16 × 1 × 117mm
11, Weight: about 120g (excluding output wires)