Motor rotor lamination with OD 1250mm 240 slots

SINGLE SLOT NOTCHING

At present, the outer diameter of the largest punching sheet we produce is as high as 1250mm, which is currently the largest width of silicon steel coil. In order to offset the tooth harmonics during the operation of the motor, the slots of the stator core or rotor core are often designed to be skewed, rotary notching is very suitable for the production of this type of motor lamination, which is quite useful for the designs of large size motors.    

WORKING PRINCIPLE

In the process of single notching, the tool only cuts one slot on the round sheet at one time, which means that the total number of cuts is equal to the number of slots on the lamination. All of our CNC single notching press have a high precision positioning system and indexer, which can control every action of the machine and allows us to produce some very special laminations.

APPLICATION & COST

Single notching is very suitable for low-to-medium volume production or prototype development, the tool cost of it is quite low. Its production speed is relatively slow, and the time to produce a lamination varies from a few seconds to tens of seconds. However, more than half of our CNC presses are equipped with automated production systems. These devices can greatly reduce production costs while ensuring production speed.

It can be seen from the electromagnetic structure of the synchronous motor that the stator magnetic field and rotor magnetic field of the motor are independent of each other; the stator part does not need to excite the rotor part, so the efficiency of this type of motor is relatively high.