MOH cold patcher

HGY5122TYH MOH Pothole Cold Patcher 

MOH cold slurry patcher its working principle is to aggregate, cement, water, emulsified asphalt according to certain proportion to the mixer, the rapid mixing to form a composite Organic hydraulic material (Multiplex Organic Hydraulicity materials, referred to as the MOH), the technology is the emulsified asphalt and other Organic materials with inorganic binder such as cement by the macroscopic and mesoscopic compound formed by road construction materials.

MOH design thinking is in view of the poor performance of asphalt mixture at high temperature, deformation of large deficiency, inorganic binder for performance improvement, such as adding cement asphalt as base, continuous scattered in composite materials, cement as strengthening phase, dispersed in the matrix asphalt, modified against the substrate performance, higher levels of asphalt pavement maintenance requirements.

HGY5122TYH is used to deal with the road damages such as local cracks, ruts, and pits as well as for the repair work of country road, squares, community road and the temporary pedestrian paving work. It can enhance the skid resistance and waterproof of the road surface, to improve road flatness road surface and traveling comfort with the result that the effect [renewal" is achieved.

 Performance:

1. It can be used for emergency repair of small potholes to prevent the further damages.

2. It is suitable for emergency repair under bad construction conditions, such as after rain, in winter.

3. It would take a short time to repair the potholes by filling them with MOH slurry and compacting under low temperature and high moisture conditions. It is an all-weather equipment for road repair.

4. The machine is at high automatic level, which is easy to be operated by only 3 persons (including the driver). The traffic would not be closed as soon as the repair finishing.

5. No need for heating will reduce the costs and improve the working conditions, which is energy saving and environment-friendly.

6. With wide application scope, the machine is not only applied for asphalt road repair, but also for the repair of cement, concrete and other pavements.

 Characteristics:

1. It can meet the requirement of pits patching (cold patching) construction technology and achieve spraying with viscous oil, cold-patch materials mixing functions.

2. The feeding system has a quantitative ratio and can achieve continuous feeding.

3. The auxiliary equipments are equipped with hydraulic power interfaces to meet the dynamic needs of different devices.

4. It is also equipped with high-pressure cleaning, lighting and other auxiliary function to facilitate construction.

5. Double axles in mixer stir the mixtures powerfully and completely to make sure no mixing dead-angle and good slurry effect. It can achieve synchronization construction and the discharge location of the mixing tank can be adjusted in construction thus is more efficient.

6. It can calculate size of pot hole and measure the amount of discharge automatically.  

7.  Hydraulic power output module can supply hydraulic power to additional hydraulic tools.

8. Recommended additional tools include hydraulic breaker, walk behind vibratory roller, plate compactor, etc

9. It is also equipped with high-pressure cleaning, lighting and other auxiliary function to facilitate construction.

10. Compulsory double-axle mixer and highly wearable mixing leaves are easy to maintain.

11. The machine takes full power from truck engine. Every system is independently controlled. The performance is stable and reliable.

 Main Technical Parameters:

Also,we have Asphalt Bitumen Distributor Truck,Road Synchronous Chip Sealer,Road Surfacing Maintenance Truck,Asphalt Production Plant,Road Surfacing Maintenance Machine and so on.