Specifications Styrene free, safe and non-toxic
High strength, strong adhesion
Aging resistance, acid-alkali resistanc
Good thixotropy
HM-500+ epoxy injection-type anchor adhesive HM-500+epoxy injection-type anchor adhesive is a 3:1 two-component, high-solids, epoxy-based anchoring adhesive formulated for optimum performance in both cracked and uncracked concrete. Resin and hardener are dispensed and mixed simultaneously through the mixing nozzle.
Advantages a) Modified epoxy resin, styrene free, safe and non-toxic. b) High strength, strong adhesion, good toughness, effect is equivalent to be embedded. c) Aging resistance, acid-alkali resistance, no expansion, no creep, good seismic resistance performance and heat-resistant performance. d) Low moisture sensitivity,long-term load stability in a damp environment. e) Good thixotropy, especially suitable for anchoring the side or top. f) Resin and hardener are packaged by twin cartridge and mixed simultaneously through the mixing nozzle by special dispenser gun, which do not need manual mixing. Performance indexes of epoxy injection-type anchor adhesive
Volume | 390ml |
A (epoxy resin) appearance | white paste |
A (hardener) appearance | red or black paste |
Mixture ratio | 3:1 |
Viscosity | 18-22 Pa.S |
Density of curing material | 1.50±0.10 g/cm3 |
Operation time(20℃) | 25min |
Curing time(20℃) | 12hour |
Solvent Content | Less than 0.5% |
Shelf life | 12 months |
Operation and Curing period at different temperatures
Colloidal performance | Splitting tensile strength | ≥8.5Mpa |
Bending Stress | ≥50Mpa |
Compressive Stress | ≥60Mpa |
Adhesion performance | Steel-steel Bond Tensile anti-shear strength | ≥16Mpa |
Under the constraint drawing condition, ribbed steel bars and C30 (φ25,L=150mm) | ≥11Mpa |
Adhesion strength of concrete C60(φ25,L=125mm) | ≥17Mpa |
Package 1.390ml per piece, and 30pcs in one box 2.10 free nozzles are free for one box 3.1 free glue gun for 6 boxes. What you may concern? 1, Sample is provided 2, MOQ: 30PCS 3. Neutral package is acceptable 4. OEM is acceptable Kind reminder:the anchor adhesive needs to matc he glue gun,if you need them,please feel free to contact me, i will do me best to provide you the best service.