Notice:
The distance between the filament paths is 2mm larger compared to the old-style Cyclops. This makes Cyclops+ compatible with the Kraken, for those looking to experiment.
Water Cooling
Please leave a message needs to 12v or 24v, otherwise the default shipping 12v
Multi-Extrusion
Choose the Chimera+ for two-filament, two-nozzle dual extrusion, great for multi-material supports. Or try the unique two-filament, one-nozzle Cyclops+. With a hot side designed to switch seamlessly between inputs, Cyclops+ never leaves an idle nozzle.
Ecosystem Compatibility
Cyclops+ and Chimera+ fit our standard fans, thermistors and heater cartridges. Chimera+ works with our full range of E3D nozzles. The watercooled variants work with our standard water-cooling kit.
The Cyclops heater block has been completely reworked, improving performance and making it more adaptable. We’ve removed all unnecessary material, lowering the thermal mass and reducing heat-up times. By changing the outer architecture of the block, we’ve also reduced the amount of heat radiating down from the block onto the print. This makes it easier to print small, complex parts without the need for a silicone sock.
The distance between the filament paths is 2mm larger compared to the old-style Cyclops. This makes Cyclops+ compatible with the Kraken, for those looking to experiment.
Water Cooling
By switching to an Aqua water-cooled heatsink, both all-metal HotEnds can be used in the hottest of ambient environments.
The Cyclops Aqua and Chimera Aqua share a highly effective water-cooled heatsink that is compatible with our water-cooling kit and nylon tubing. It's so small and lightweight that if you're looking for a water-cooled V6 equivalent then look no further!
Set 1 Package included:
Cyclops + water cooled hotend
1x 0.4 brass nozzles
1x 12V/24V 40W heater cartridges
1x Thermistor cartridges HT-NTC100K(choose 13 in marlin firmware, Nozzle temperature: 180℃-260℃ )
Heatsink compound
Set 2 Package included:
Cyclops + Heating block
1x 0.4 brass nozzles
(Does not include heating tubes and thermal )
Set 3 Package included:
Chimera + water cooled hotend
2x 0.4 brass nozzles
2x 12V/24V 40W heater cartridges
2x Thermistor cartridges HT-NTC100K (choose 13 in marlin firmware, Nozzle temperature: 180℃-260℃ )
Heatsink compound
Set 4 Package included:
Cyclops + & Chimera + water cooled hotend
3x 0.4 brass nozzles(Does not include heating tubes and thermal )
Heatsink compound
Set 5 Package included:
Cyclops + & Chimera + water cooled hotend
3x 0.4 brass nozzles
3x 12V/24V 40W heater cartridges
3x Thermistor cartridges HT-NTC 100K(choose 13 in marlin firmware, Nozzle temperature: 180℃-260℃ )
Heatsink compound
Set 6 Package included:
Cyclops + & Chimera + water cooled hotend
3x 0.4 brass nozzles
3x 12V/24V 40W heater cartridges
3x Thermistor cartridges K type thermocouple( Nozzle temperature: 180℃-400℃ )
Heatsink compound
Set 7 Package included:
Cyclops + & Chimera + water cooled hotend
3x 0.4 brass nozzles
3x 12V/24V 40W heater cartridges
3x Thermistor cartridges PT100 Temperature Sensor( Nozzle temperature: 180℃-400℃)
Heatsink compound
