LED Driver Desc Meanwell Ul Ce standard 16w waterproof Led driver
LPF LED Driver Features: * Universal AC input / Full range
* Protections: Short circuit / Overload / Over voltage / Over temperature
* Built-in active PFC function
* High efficiency up to 91%
* Fully isolated plastic case
* Epoxy encapsulated with IP67 level
* Class 2 power unit
* Optional dimming function (1~10Vdc .or PWM)
* Compliance to worldwide safety regulations for lighting
* Suitable for dry / damp locations
* 5 years warranty LPF series is high-grade and waterproof led driver models, fully isolated plastic case with IP67 level for LED lighting and moving sign applications. LPF built-in active PFC function, with complete protections and safety certificates (UL, ENEC,PSE, CB, CE, EMC). LPF series switching power supply has high reliability, 5 years warranty, suitable for dry/ damp/ wet locations. This power supply combined with connectors provide a pleasing and imposing aesthetic with a unique and function design that combines modern aesthetics with the power of a high- grade product. Mean well LPF series led driver high power AC/DC led driver range from 16 to 90 watts has been earning supreme customer’s rating for a long time.
Once you’re found an Mean well LED driver, Kulon Electronics will make your Mean well placing order easy. These LED drivers suitable for LED lighting and moving sign applications. We offer a wide arrange of LED power supply to increasing demand of LED lighting applications. “Total quality assurance and customer satisfaction” are the central goals of our company.
LED Driver Parameter
Model | LPF-16-12 | LPF-16-15 | LPF-16-20 | LPF-16-24 |
| | | | | |
Output | Rated Current | | | | |
Constant Current Region | | | | |
Rated Power | | | | |
Ripple& Noise (max.) Note.2 | | | | |
Voltage Tolerance Note.3 | |
Line Regulation | |
| Load Regulation | | | | |
| Setup, Rise Time Note.6 | 1500ms, 80ms / 115VAC at full load 500ms, 80ms / 230VAC |
| Hold up Time (Typ.) | 16ms at full load 230VAC /115VAC |
Model | LPF-16-12 | LPF-16-15 | LPF-16-20 | LPF-16-24 |
| Voltage Range | |
Frequency Range | |
Efficiency (Typ.) | | | | |
| AC Current (Typ.) | 0.4A / 115VAC 0.25A / 230VAC 0.2A/277VAC |
Inrush Current (Typ.) | COLD START 45A(twidth=200μs measured at 50% Ipeak) at 230VAC |
Max. No. of PSUs on 16A Circuit Breaker | 14 units (circuit breaker of type B) / 24 units (circuit breaker of type C) at 230VAC |
Leakage Current | |
Model | LPF-16-12 | LPF-16-15 | LPF-16-20 | LPF-16-24 |
| Safety Standards | UL8750, CSA C22.2 No. 250.0-08,EN61347-1, EN61347-2-13 independent,EN62384,J61347-1, J61347-2-13 approved,IP67 (optional) ; Design refer to UL60950-1, TUV EN60950-1 |
Withstand Voltage | |
Isolation Resistance | I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH |
EMC Emission | |
EMC Emission | Compliance to EN55015; EN61000-3-2 Class C (≧50% load) ; EN61000-3-3 |
EMS Immunity | Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547,light industry level(surge 2KV), criteria A |
Note | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltage. Please check the static characteristics for more details. 5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again 6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time. |
LED Driver Cer
LED Driver APP LPF series led drivers are suitable for LED lighting and moving sign applications and for dry/damp locations.
Packing&Delivery Meanwell led driver warehouse good packing.
Related LED Driver
FAQ How to choose a right Mean well led driver?
A.To increase the reliability of the S.P.S., we suggest users choose a unit that has a rating of 30% more power than actual need.
For example, if the system needs a 100W source, we suggest that users choose a S.P.S. with 130W of output power or more. By doing this, you can effectively boost the reliability of the S.P.S. in your system.
B. Choosing functions based on your application:
1. Protection function: Over Voltage Protection (OVP), Over Temperature Protection (OVP), Over Load Protection (OLP), and etc.
2. Application function: Signaling Function (Power Good, Power Fail), Remote Control, Remote Sensing, and etc.
3. Special function: Power Factor Correction (PFC), Uninterruptible Power Supply (UPS) function.
Contact Us
Miss. Ancy Shou Skype: sales12.kulon
LED Lighting Products Consultant
Hangzhou Kulon Electronics Co.,Ltd.
Add: 6F, 3 Bld, Holley Nova Park, Liansheng Road, Wuchang Street, Yuhang District, Hangzhou, China
Tel: 0086 571 8500 3730 / 8500 3733 Fax: 0086 571 8500 3737 QQ: 2853053266
Website: www.kulonlight.com