Ltv-88 Smt Vertical Push Switch 

product name:LTV-88 SMT Vertical Push Switch

Specifications

1.Ratings: 0.10A 30VDC 100,000 cycles
                   1.00A 13VDC 20,000 cycles
2.Operating Temp: -40ºC ~ +85ºC
3.Contact Resistance: 50mW max. initial
4.Insulation Resistance: 100 MW min.
5.Dielectric Strength: 500VAC for 60 +/- 5 sec
6.Housing: UL 94V0
7.Travel-to-lock 1.5mm (Total travel: 2.5mm)
8.Timing: Non-shorting
9.Soldering: Wave/Re-flow Soldering Ordering Qty: 1000pcs
10.Operating Force: 240 +/- 50gf
                                    350 +/-100gf
                                    450 +/-100gf

Ordering Instruction





Installations


Recommended Re-flow Soldering Profile

CAUTION!
1. The conditions mentioned above is the temperature on the PCB surface on which parts are
mounted. As the switch actuator is high, there are cases where board's temperature greatly
differs from switch's surface and plunger. Extremely care should be taken to prevent the
switch surface and plunger (the highest point) temperature from exceeding 260ºC.
2. The conditions vary depending on the kind of soldering equipment, please make sure you
have the right one before mass production.

Standard Items
There is only one 8.6mm actuator type in mass production, please refer to the LTV-85 series for the other possible
actuators which can be tooled up on demands for SMT version. Please contact Toneluck for details.


LTV-88 SMT Vertical Push Switch