Product description
Low profile power inductor
Low DCR leaded power inductor
Large-current SMD power inductor
SMD magnetically shield power inductor
Shielded SMD power chip inductor
Magnetic shielded surface mount inductor with high currentrating
Low profile and shielded very effective in space-consciousapplications
Low resistance to deep power loss minimum
Operating temperature: -20 to 85 degree Celsius (containheating coil)
Appearance inspection: no external defect by visualinspection
Terminal strength: after soldering, between copper plate andterminals of coil, push in two directions of X, Y with standing asbelow conditions
Terminal should not peeled off
Heat endurance of re-flow soldering: 240
Insulating resistance: over 100M ohms at 100V DC between wireand core
Dielectric strength: no dielectric breakdown at 100V DC for oneminute between wire and core
Temperature characteristic: inductance coefficient (0 to 2,000)x 10-6/(-25 to +80) inductance deviation within ±5.0%, after96 hours
Humidity characteristic: in 90 to 95% relative humidity at 40±2 and one hour drying under normal condition
Inductance deviation within ±5.0% after vibration forone hour
Vibration resistance: in each of three orientations at sweepvibration (10-55-10Hz) with 1.5mm p-p amplitude
Similar to coil craft and Toko, Sumida, TDK, and Muratabrands