Specifications 900MHz 3g mini lcd repeater gsm
1:Cover about 100-300sqm without block
2:Output Power:17dbm
3.65dBi gain
4.easy install
Product Description Lintratek brand Wireless device UMTS dual band GSM DCS mobile signal repeater 1.Support GSM/ WCDMA 2G/3G network 2.Warranty:2 years 3.Quality certification:CE,RoHs Why do you need to buy repeater/booster?
Specification should care about :
Model No | KW17G-GW |
Parameter data | Uplink | Downlink |
Frequency Range | GSM+WCDMA | 890-915/1920-1980MHz | 935-960/2110-2170MHz |
Gain | 60±2dB | 65±2 dB |
Bandwidth | Wide Band | |
Automatic Gain Control | ≤ 20dB |
Ripple in Band | ≤4dB |
Intermodulation Products | 9KHz~1GHz | ≤ -36 dBm |
1GHz~12.75GHz | ≤ -30 dBm |
Spurious Emission | ≤ -36 dBm |
| ≤ -30 dBm |
Noise Figure @ max. gain | ≤ 6 dB |
VSWR | ≤2 |
MTBF | >50000 hours |
Mechanical Specification |
Power Comsumption | < 10W |
Impedance | 50 ohm |
Power Supply | AC:100~240V, 50/ 60Hz;DC:5V 2A |
RF Connector | N-Female |
Cooling | Heatsink Convection cooling |
Dimensions (D x W xH ) | 150*110*22(mm) |
Weight | 0.9KG |
How should you install repeater (very easy and simple): Step 1: Use your mobile phone to test signal strength outside house or on roof, -70dbm is the basic requirement (full bar). Step 2 Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. Step3: Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. step 4: Mount your indoor antenna with signal repeater step5: Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal. Note: Connect outdoor (BTS) port with outdoor antenna, connect indoor ANT(MS) port with indoor antenna, outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away from each other at least. Indoor and outdoor antenna must be separated by wall. Packaging & Shipping Mobile repeater packing photo(eg):
Company Information
FAQ