laser height sensor system, automatic height control

laser height sensor system, automatic height control        Optimum cutting quality and highest cutting speeds can only be attained at a constant distance between the work piece and cutting head. Even the smallest deviations lead to burr formation or influences the cutting speed, the depth roughness of the cutting surface and the clearance is not good. Therefore, a distance sensor system is need in all fiber cutting heads that are completed with the adjustment device to a fully automated distance control cycle.

    If you also need auto focus system for low speed, we recommend our another model CHC-300: CHC-300, support CO2, YAG, fiber laser, only apply for metal, can support max speed 10m/min     Introduction CHC-1000 is a servo based cap sensor designed for high speed cutting up to 60m/min.
It is mainly used on fiber laser, CO2 laser metal sheet cutting height control.
Support Simens, Fagor, Beckhoff, PA8000....most cnc controller for laser cutting,
Support all kinds of fiber laser like IPG, Rofin, SPI, Trumpf, Raycus from 500W to 6000W. CHC-1000L is a closed-loop controller for laser cutting height control( called Auto focus system in laser cutting field). By providing a unique Ethernet communication(TCP/IP protocol) interface, it can support many funnctions with CNC controller for laser cutting, such as automatic tracking of cutting height, segmented piercing, progressive piercing, edge seek, leapfrog, arbitrary setting of lift-up height of cutting head. 
Thanks to our years experience of different kinds of torch height controller design, Currently CHC-1000L should have better response rate than other similar products.