Large capacity AC motor maganese powder ball press machine

Large capacity AC motor maganese powder ball press machine   The simple instructions of maganese powder ball press machine  Maganese powder ball press machine is mainly used for high-density metal scrap (scrap iron, copper scrap, aluminum scrap, etc.), granular powder metal powder (iron powder, aluminum powder, copper powder, lead powder, etc.) , metallurgical additives, sponge iron, etc., without adding any binder pressed into the case of cylindrical cakes of high-density block (weight 2-8 kg), the cake density of up to 5T/M3 block above (the different raw materials, press out the cake block density and not quantity is not the same), pressed into the cake pieces can be directly cast furnace use. 1) Raw material size should be smaller than 5mm. 2) The best moisture for briquetting is 10-15%.   Features of maganese powder ball press machine: Maganese powder ball press machine is equipped with self-protective device. The hydraulic protective device can inject the high pressure oil into the hydraulic cylinder with the hydraulic pump and make the piston produce axial displacement. The font joint of the piston rod is pressed onto the bearing pedestal to satisfy the production pressure requirement. When there are too many materials between the two rollers or metal block goes into the rollers, the hydraulic cylinder piston rod will pressed, and the hydraulic pump will stop, and the energy accumulator will have buffer action on the pressure change. The overflow valve will start for oil return and the piston rod will have displacement to increase the gap between the two rollers, so that the hard materials will go through the rollers, and then the system pressure will resume to normal, this design can protect the roller from being damaged. According to the requirement for the press density, this machine can be adjusted in pressure, so that the production process is mobile and flexible.   Application of maganese powder ball press machine: The maganese powder ball press machine have been mainly used in home fire, heating with anthracite honeycomb made of cylindrical briquettes. Previously been processed into the coal sphere slightly larger than ping-pong, and later the coal processed into one cylinder, and marked with a number of holes inside the cylinder, because it can increase the surface area of coal, so that the full combustion of coal, to reduce resource waste.   Working principle of maganese powder ball press machine: This series of maganese powder ball press machine will make the powder pass the power on to the two pressure roller through the reducer. The two sides and roll rotation, in both the rotating roll, Natural materials to enter the ball roll mode, with the roll rotation, material pressure on a small become larger, When the material to the two rollers rotating line contact point, the pressure of materials has reached the peak. Tremendous pressure in the role of line, the materials become a finished product from the powder ball.   Production process of maganese powder ball press machine: Crushing(if material not in powder)→Mixing→ add biding material →maganese powder ball press machine→ Drying→ Packing & Sales.Final briquettes size will be 30-60mm or custom-made.     If you are interest in our maganese powder ball press machine, please contact us without delay, our engineers can design the most reasonable proposal for you based on your demand.