Laptop Security System for Cell Phone

1. Most PC chain stores or shopping malls use kensington lock as their first defence against theft of notebooks, tablets or mobile phones on display. Abetter way to protect your expensive hardware is to use an advanced alarm system with detecting sensors.

2. Introducing multi target smart alarm, it can be 4, 6, 8, 10 gadgets simultaneously at retail or trade show environments, built-in battery provides continuous security even during blackouts or major building power failure, when powered by AC current, it can also charge and power up tablet and mobile phones on display.

Basic information

Operation voltage: 5.0 VDC
Standby current: ≤ 7 ma
Activation power consumption: ≤ 7 ma
Each USB port outport: ≥ 5.0 V dcc, 1.0 a
Alarm output: ≥ 195 dB
Induction method: Contact separation, alarm or break alarm, USB jack separation, charge tamper alarm
Multi targets: 4, 6, 8, 10 targets
Built-in battery
Adaptor: USA, UK and Europe standard
Voltage: Supply from 110 V to 240 V

Product feature
1. Quick reaction speed, pull or cut the USB cable, the alarm warning.
2. With self-test function design, the factory settings to default the port is turned off, the alarm power USB port to connect the device host to detect the port, and take the initiative to close the idle port (idle port will automatically turn off, not man-made blockage), access device port detected automatically in the security state.
3. Once the alarm has been triggered, restitution ca not disarm, the alarm must be reset by host key to disarm the alarm (press remote control red key 2 seconds to relief). With very higher safety factor, it can protect customer's property.
4. Built-in alarm horn, high-volume alarm speaker is hidden inside the chassis of the host, so you can avoid destruction of the thief, such as the possibility of failure to cut the external alarm horn line, greatly improving security. (if necessary, user can add an external speaker on the wall or easy to hear the alarm sound, the external speaker jack plug into the rear side host).
5. With remote function, easy to use (can order extra remote controller, if necessary).
6. LED light display each port current status.
7. USB interface, ring type, mini end selectable, the cable length can be requested.
8. Wide range application: Digital store, electronics stores or exhibition in notebook, tablet PC, cameras, smart phone, MP3, MP4 and the GPS and other exhibits anti-theft and reusable.

Product operation
1. Connect one end of the cable to the alarm (USB port), the other end connected to the object.

2. The adaptor jack plug into the alarm (on rear side).

3. The power supply plug into AC outlet, the alarm horn chirping sound, the power is on, the alarm panel turn on indicator LED corresponding port, the host is already in the security state (in active position).

4. Press red key on remote control to relief alarm, the alarm panel LED turns off.

5. If the installation of equipment to port which way the light does not illuminate, indicating which way is not connected, reconnect until the LED lights on.

6. When the anti-theft device was break, or off line, the host immediately chirping alarm, while the corresponding port indicator light flashes, the staff on duty should be checked in the equipment of the ports and pay attention to whether there is "theft" by. Need to disarm the alarm status; You can press the reset button (or remote button) to lift alarm.