KINAKI Heat Pump Type Noodle Dehydrator /Noodle Drying Machine Product Description KINKAI Heat Pump Noodle Drying Machine Introduction KINKAI heat pump noodle drying oven is a device that transfers heat from a colder area (ambient temperature) to a hotter area (drying chamber) by using mechanical energy, as in a refrigerator
How Does The Dehydrator Work? 1, Dryer evaporator of refrigerant absorb the air from outside. 2, Then compressor works that make the air temperature rise. 3, Heat exchanger change the hot air into drying chamber. 4, Final vegetables/fruits will be dried by the hot air circulating in drying chamber. KINKAI Heat pump noodle drying machine has large capacity and easy to operate characteristics. mainly suitable for dehydrated vegetables, fruits etc.agricultural and sideline products, Chinese herbal medicine as well as chemical materials dry. KINKAI drying machine consists of a trolley, drying tray, heat exchanger, blower fan, LCD controller cabinet and drying chamber, The entire machine is made of insulation material and stainless steel, fully satisfying food hygiene requirement.
Advantages Features of KINKAI Heat Pump Drying Machine. 1. Adopt close dehumidify + circulating drying type, saving operating cost;Without waste gas and waste heat pollution, low noise. 2. PLC + Touch Screen, operating easily; can setting different drying curve, Suitable for drying different materials. 3. Second waste heat recovery technology (patent).Adopt air to air heat exchanger dehumidify and recovery waste heat at the same time, the heat efficiency is high and energy is saved. 4. By using the forced ventilation function, there are the adjustable air distribution plates inside the oven. The materials can be dried uniformly.
5. The temperature: hot air heating 10-75°C, max, 75°C.
6. The baking plate dimensions and materials can customize as customer request. 7. During drying, the material does not craze, does not distortions, non-discoloring, never degenerate, non-oxidize, drying completely, with good rehydration, keep nutrient content; 8. Safe and reliable operation, automatic intelligent control, 24-hour continuous drying.Stable operation without being influenced by weather. Parameters
Model | JK03RD | JK06RD | JK10RD |
Suitable for drying chamber | m3 | 10~20 | 20~30 | 30~40 |
Power supply | V/PH/HZ | 380/3/50 or 220/1PH/50 | 380/3/50 | 380/3/50 |
Power input | KW | 2.8 | 5.8 | 10.8 |
Running current | A | 8/17 | 12.6 | 22.5 |
Auxiliary electric heater(option) | KW | 9 | 9 | 9 |
Heating capacity | KW | 12 | 26 | 35 |
Cooling capacity | KW | 7.5 | 20 | 25 |
Dehumidification amount | L/H | 8 | 20 | 40 |
Max. hot air Temperature | ℃ | 75 | 75 | 75 |
Working ambient temperature | ℃ | -10~45 | -10~45 | -10~45 |
Refrigerant | Kg | Mixture type/2.5 | Mixture type/4.3 | Mixture type/8.0 |
Compressor | Type | Scroll | Scroll | Scroll |
Brand | Copeland/Danfoss | Copeland/Danfoss | Copeland/Danfoss |
Quantity | 1 | 1 | 2 |
Noise | dB(A) | 60 | 65 | 70 |
Fan motor for drying | Power input/unit | 250W/unit | 250W/unit | 250W/unit |
Wind volume | m3/H | m3/H | 2500m3/H/unit |
Recommend qty | 8 | 8 | 16units |
Heat regenerator size | mm | 500*350*350 | 500*500*580 | 550*600*680 |
Fan motor for heat regenerator (dehumidify) | Power input | 200W | 370W | 550W |
Wind volume | 2000m3/H | 2000m3/H | 3500m3/H |
Size(mm) | 450*330*380 | 470*320*470 | 580*320*580 |
Wind valve | Power input | 6W | 6W | 6W |
OPEN | Exchange fresh air | Exchange fresh air | Exchange fresh air |
CLOSE | Drying | Drying | Drying |
Size(mm) | 480*320*120 | 630*560*120 | 720*640*125 |
Fan motor for evaporator (2 units) | Power input | 250W/unit | 780W/unit | 780W/unit |
Wind volume | 4600m3/H | 10500m3/H | 2*10500m3/H |
Rotate speed | 1350RPM | 1350R/Min | 1350R/Min |
Hot air outlet | mm | 600*1100 | 650*1100 | 860*1485 |
Hot air return inlet | mm | 690*1100 | 750*1100 | 1050*1450 |
Dimension(L*W*H) | mm | 1650*960*1280 | 1720*1160*1280 | 2100*1460*1590 |
Net weight | Kg | 210 | 385 | 480 |
Gross weight | Kg | 240 | 420 | 540 |
Buying Guides Recommend Drying Machine+Drying Chamber
Item | Description | product Capacity | Drying Chamber Size |
1 | JK03RD Single dryer | 300KG/batch | 4000*2000*2200mm |
2 | JK06RD Single dryer | 600KG/batch | 6000*2800*2200mm |
3 | JK10RD Single dryer | 1000KG/batch | 6000*3000*2200mm |
4 | JK03RD Double dryer | 800KG/batch | 7000*2000*2200mm |
5 | JK06RD Double dryer | 1500KG/batch | 10000*2800*2200mm |
6 | JK10RD Double dryer | 2500KG/batch | 10000*3000*2200mm |
Warm prompt: We can make any drying chamber sizes as your required. Comparation • Old type traditional drying room
1.Drying process is difficult to meet the requirements of food hygiene;;
2.Much coal dust, and finished goods bleak in clolor;
3.Need to replace coal midway, large labour intensity;
4.During drying, it generates large plenty of gas such as CO2/SO2/soot, with poor working conditions
5.Soot gas for the oven equipment corrosion is serious, short service life.
6.The temperature is difficult to achieve automatic control; Temperature and humidity in drying process fluctuation is bigger, affect the drying quality. • High temperature heat pump drying dehumidifying drying room:
1, Drying process completely meet the requirements of food hygiene;
2, Cleaning and hygiene in the good condition, the finished colour and lustre is bright;
3, Automatic control, reduce the labor and the labor intensity;
4, During drying, there is no water/gas/solids generating, the green environmental protection; Good and comfortable working environment .
5, Long service life, low operating cost, good economy;
6, Temperature and humidity is automatic control; Small fluctuations in the temperature and humidity in drying process, the drying quality is stable and reliable.
Our Services A. Payment service
1, T/T
2, L/C (for container order only)
3, Western Union, (for sample order & parts)
B. Technical service
1, We calculate the capacity and recommend the best models.
2, We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
3, We supply the spare parts and technical support in & after the warranty time.
4, We supply the training course to your workers at our factory if you need.
C. After-sales service
1, Technical support for your installation, operation and maintenance.
2, One year’s warranty, and you can pay for extended warranty.
3, Spare parts and technical support at most economic prices after the warranty
Certifications
If you are interested in our product,please feel free to contact me for more information.Thank you! Contact Me!