Features:
A. Stable performance with advanced PLC.
B. Conveying preforms automatically with conveyor.
C. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
D. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
E. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
F.No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
G. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
H. Strong clamping force with high pressure and double crank links to lock the mold.
I. Two ways of operating: automatic and manual.
J. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
K. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
L. Contamination is avoided for the bottle body.
M. Ideal effect of the chilling with the chilling system.
N. Easy installation and starting
O. Low rejection rate: less than 0.3percent.
Technical parameter:
TYPE
ITEM
UNIT
JYX-A4 technical data
Container
Product material
/
PET
Container volume
L
0.05-2.0
Theoretic output
Psc/hr
4200
Max height of bottle
MM
400
Molding
Preform inner diameter
mm
15-60
Bottle diameter
mm
35-110
Max mold plate dimension (L × W)
mm
380 × 460
Max mold thickness
mm
300
Air compressor
High pressure compressor
M3/Mpa
1.2/30 × 3set
Mold opening stroke (adjustable)
mm
200
Low pressure compressor
M3/Mpa
2.0/10 × 1sets
Air dryer
M3/Mpa
2.0/30 × 1sets
Main machine electricity
Power
KW
30
Voltage / frequency
V/Hz
380/50hz
Machine size and weight
Main machine (L × W × H)
M
4.2 × 1.8 × 2.0
Main machine weight
T
4.2
Conveyor (L × W × H)
M
1.4 × 1.1 × 1.85
High pressure compressor (L × W × H)
Kg
1.90 × 0.75 × 1.50 × 3sets
Low pressure compressor (L × W × H)
M
1.85 × 0.75 × 1.50
High pressure air reservoir tank (D × H)
M
0.70 × 2.25/3.0
Air dryer (L × W × H)
M
0.85 × 0.50 × 0.95
Cooling water: cooling water recycling system can be used with its power of 8~10 liter per minute and 2~3 kilos water pressure
Total power: 51.9 high pressure air volume (1m/min); low pressure air volume (1.2m/min)
Safety
Auto emergency alarm
Safety inter-locking device