JTS Adjustable Speed Tube Fitting (BRASS)

                              JTS Adjustable speed Tube Fitting (BRASS)
Use: Connect cylinder with intake and outlet pipes to control the air volume, particularly
          in low volume section, to adjust the working condition to the best .Maximum
          pressure: 1.0Mpa
Installation: 1.Connect rigid pipes, semi-rigid nylon pipes, plastic pipes. Cut the pipes and
                          remove the bur and insert the pipe deep to the bottom.
                      2.When removing the pipe, fix the joint and pull the pipe out.
                      3.Cut the wear part of the pipe after repeated remove.
                      4.Turn the joint to adjust the direction.
Model: IAdjustable speed Tube Fitting Nominal inner diameter∮10mm Thread ZG3/8”
Model: JTS-JTS-Z10(ZG3/8”)