interesting in gantry style cutting machine Features and advantages 1. Compare with the plasma cutting, it has the high precision cutting for different kinds of metal materials, like cutting stainless steel, carbon steel, alloy steel, spring steel, aluminum, copper, silver, titanium and other metal materials below 6 mm. 2. Compare with the NC, which can cut any complicated process and shape.No noise and no need to open any moulds at all. 3. Compare with linear cutting, which has much faster speed,100 times higher than it. 4. Double lead screw to drive, Small heat affected zone, good dimension stability. Flat and handsome laser-slotted, without later process 5. High performance/price ratio: the price is only 1/8 of the similar CO2 laser cutting machine and 2/5 of the equivalent NC Punch 6. Low use cost: only USD2 per hour which is 1/8-1/10 of the similar CO2 laser cutting machine (USD22-USD35 per hour) 7. Low follow-up maintenance cost: only 1/10-1/15 of the similar CO2 laser cutting machine and 1/3-1/4 the equivalent NC Punch 8. Steady performance: as a mature laser apparatus, the YAG laser cutting machine is suitable for most metal manufacturing and processing industry. Technical parameters
Model: | XGX2014 |
Working size: | 1300mm×2500mm |
Cutting thickness: | 0.1mm-8mm |
Max. output power: | 650W |
Medium of Laser | Nd: YAG |
Laser wavelength: | 1064nm |
Pulse frequency: | 1--300HZ |
Min. linewidth: | 0.12mm |
Electrical source: | 380V/50HZ/100A |
Cutting precision | ≤±0.04 |
Supported format | Plt, Dxf, AI, Dst etc |
Continuous Working Time | 24 hours |
Machinel weight: | 3000kg |
Cooling way | water-cooling |
Blowing way | Oxygen, Compressed air or Nitrogen |
Max. cutting speed: | 8m/min |
Control system and software introduction This control system is composed by the industrial PC, center control card, controller display of power supply, professional control software. The PC is installed into the control box, the center control card receive the orders from the software and execute it. Through the controller display of power supply, we light the Xe lamps, adjust the cutting parameters like current, frequency, pluse width accroding to different materials and plate thickness. And through the control software, we imput the cutting file, add the lead line, give kerf compensation, fix cutting position and so on. CERTIFICATION
working situation
PACKING PICTURE
contact
working situation 
PACKING PICTURE 
contact 