Infant Incubator (MT02007005-01)

Infant Incubator MT02007005-01
Based on MT02007005, MT02007005-01is added with the side door which can be opened so that the bassinet can be pulled out.
1, Air mode control, set temperature and air temperature are displayed separately;
2, Natural air flow humidity;
3, Failure alarm indication;
4, RS-232 connector.

Brief introduction:
Servo-controlled by micro-computer; Quite operation windows can reduce the disturbance to the baby during nursing; Touch switch panel with LED digital display, set-temp, real-temp are displayed separately; Multiply self-checking alarms with audible and visible; Heating power rate indicates 0-100%; The infant bed can be pulled out from the side door

Standard configure:
Hood, infant bed, temperature controller, water tank, air filter, I. V. Pole, stand.

Technical specification:
Power supply: AC220V, 50Hz
Power input: 600VA
Air Temperature control range: 25º C~37º C
Changing of temperature: Uniformity of temperature: Temperature rising time: Noise level:
Alarming:
Audible and visible alarm indication, and it can indicate the real temperature and cut off the power supply of heater.
Over-temp alarm: When the temperature control Deviation alarm: +/-3º C;
Sensor alarm: When the sensor is disconnected, open circuit, short circuit or put on the wrong place;
Fan alarm: When the fan is blocked, speed Power failure alarm: When there is no power or the power cord is disconnected.
System alarm: When there is E2ROM malfunction inside of temperature controller.

Package:
Gross Weight: 72Kg
Measurement: 1085mm x640mm x1065mm