Induction Forging Furnace - 35KW

Application:
SEFF forging furnace series is used to heating rod with diameter from 15 to 80mm or quadrates or other shape stuff in the shaping of screws, nuts, valves, locks and other metal parts, the material can be steel, stainless steel, copper, brass, aluminum and so on, that used for whole heating, partial heating or middle part heating.

Product Features:

1. Wide frequency range from 1kHz to 20kHz, frequency can be designed to satisfy different size of the heated workpieces. And the actual frequency is depended on the coil and the compensating capacitor designed. When heating small rods, frequency can be designed higher to achieve high heating efficiency, but to heat the thick rods, lower frequency is needed to maintain heat penetrating.
2. The heating coil can be 500mm to 1 meter and up, 5 to 10 pieces are heated at the same time to make sure the penetrating effect. Coil size is depended on the rod size, and coils can be easily changed.
3. In the continuous heating process, the load inside the coil is stable, thus to overcome the great heating power change caused by the great change of the load during the heating course from cool to 1100º C, the actual power can reach more than 85% of the rated power of the machine.
4. Pneumatic rod feeding system is applied, only the heating power and the feeding speed are adjusted to send the rod out continuously by step. It is very convenient to cooperate.
5. Even when heating non-ferrous metals like copper or aluminum, the actual power can also reach more than 85% of the rated power of the machine by design the coil properly and match the compensating capacitor correctly. 3.5KG copper or brass can be heated to 700º C per kilowatt in an hour.
6. Compared with SCR medium frequency furnace, it is small size, easy maintenance, it can save energy by 15-20%.