In situ sterilizable Fermentor & bioreactor 1T~30T

Specifications The SiDoLim in situ sterilizable fermentor (1T~30T) system is a polit scale fermentor and designed for ease of use.

Fermentor System 1T~30T  SiDoLim (1~30ton) system is designed based on the spirit of mass production that the system can perform the industrial scale fermentation process. The whole system is designed by the design team of Silver Double Limited.  All of the special options or ordered specifications can be acceptable. The stainless steel (SUS316L) vessel and the whole attachments can be sterilized automatically or manually in this plant scale fermentation system and the whole fermentation process can be performed automatically also. The monitoring and controlling system is selectable for integrated monitoring / controlling board of Silver Double Limited or any kinds of modular system. The master monitoring and controlling systems can be supplied for the ordered specification and PC based monitoring system is the standard specifications. Very easy to operate, wash and make maintenance as it has the open frame structure and uses stainless steel (SUS316L) plate. The pH, DO, temperature and rotation speed of the agitator are measured and controlled by the integrated controller system. Temperature of the vessel is measured by the RTD (Pt-100) and controlled by the digital PID control algorithm. The air driven diaphragm style valve protects for the contamination and easy to clean and make maintenance. Vessel Stainless steel (SUS316L) is used to prevent contamination and rusting. Water jacket system is adopted for precise temperature control. Redundant ports are installed on the head plate that the auxiliary sensor can be installed. Sensor ports are installed in the circumferential direction on the lower side of the vessel. Controller System Monitoring and controlling system is selectable and the integrated controller board of SiDoLim is standard specification but any kinds of monitoring and/or controlling module can be adopted. Standard control system is the same as that of pilot scale system. Personal computer based monitoring system is the standard specification for the master monitoring and controlling system but any kinds of the order made system is possible also. Specification  

Agitation	Motor	Top mount type AC geared motor
	Impellers	Standard : Turbine impeller and Foam breaker (316L stainless steel)
	Control	Inverter
Materials & Finish	Vessel	Using 316L stainless steel to polishing.
	Piping	316L stainless steel to prevent contamination.
	O-rings / Gaskets	Viton or silicone material is used for the O-ring and the EPDM is used for gasket.
Power Supply		Controller system : 220V 50/60Hz, single phase Fermentor system : 440V~220V 50/60Hz, single and/or three phase
Data Storage		pH, DO, Pressure, Temperature and Agitation speed

  Vessel Selection or to tailor it according to customer's request  

Total Vol.	1000L	1500L	2000L	3000L	5000L	10000L
Working Vol.	700L	1000L	1500L	2000L	3500L	7000L
Dia. : Height	1:2	1:2	1:2	1:2	1:2	1:2

  Accessories  

pH electrode	DO electrode	Foam electrode
pt-100	mechanical seal	agitation(motor)
micro tubing pump peristaltic pump	reagent chamber	air filter-main filter
Turbine impeller	foam breaker	marine impeller
Pneumatic diaphragm valve	Manual diaphragm valve	Pressure transmitter

  Option  1. Gas Mixer 2. Water Bath 3. Air Compressor 4. O2 & CO2 Gas Analyzer 5.  Automatic Bio Sampler (SenTin9024)   please contact us to get the option specification. thanks