IMO MEPC.107(49) Standard LCD Display 15ppm Bilge Alarm

   IMO MEPC.107(49) Standard LCD Display 15ppm Bilge Alarm  is researched and manufactured by Jiujiang Zhongchuan Instrument Co., Ltd. (the former Jiujiang Instrument Factory) which is a upgraded-type instrument for monitoring micro-oil content in waste water. It's suitable for continuous monitoring of the oily water discharge in the bilge, with a 15 overrun alarm system and a controlling system for waste water discharge. In most case, it applied as a set device for oil water separator.CY-2A can be used in oilfield, chemical industry,etc.   The instrument has passed Certificate of Type Approval, and meets relevant specification requirement of IMO.RES.MEPC.107(49).     Technique Index  

Measure range	0-30ppm
Accuracy	Better than ±5ppm(when 15ppm)
Display of measurement value	LCD screen display
Alarm indication	2 ways red LED
Working point of alarm	15ppm
Alarm delay 1	0 second
Alarm delay 2	4 seconds
Alarm output	2 channels of relay output
Rated value of alarm relays	3A, 250VAC, non- inductive
Output signal	4-20mA
Detection of feedback signal of output of alarm relays	2 channels of operation statue contact detection
Data of alarm data	storage and printing output
Ambient temperature	+1°C - +55°C
Relative humidity	≤93%
Temperature of sampling water	+1°C-+40°C
Pressure of sampling water	0.1-0.6 MPa
Flow rate of sampling water	0.1- 4L/min
Power supply	220VAC, 50/60Hz
Power consumption	30W
Protection grade	IP45

    JIUJIANG ZHONGCHUAN INSTRUMENT CO.,LTD