IEC60068-2-32 Tumbling Barrel Test Machine For Drop Testing

IEC60068-2-32 Standard Tumbling Barrel Test Machine For Mobile Phone Drop Testing

1.Application:

The Tumbling Barrel Test simulates repeated falls which may occur to such devices as connectors

or small remote control units which are normally attached to cables during use.

The Tumbling Barrel Test is the recommended instrument to perform such a test. A barrel is turned

at a rate of five revolutions per minute resulting in ten falls per minute. The sample falls from a height of

 500mm on to steel plate that is 3mm thick and backed by 19mm thick hardwood.

2.Specification:

Tumble Barrel Tester is made to the specifications set forth in major international standards.

Tumbling Barrel Tester employs a large clear acrylic access door for easy viewing and access to

the chamber. Models are offered with a standard barrel with a drop height of 500mm. Barrels of

other sizes are available as well for standards such as IEC 60312 or DIN 60312 where a drop height

of 800 or 1000mm is required.