lnjection blow molding machine Machine features: 1).The clamping framework adopts single-crossbeam, double pillars, which enlarges the space of setting mould, will be easier to install mould. 2).Adoption of tie-bar protection makes open / clamping mould work while transfer table rise / fall, so the production efficiency improve obviously.(optional) 3).Available variable pump get further power consumption saving in system.(optional) Servo motor system/ servo motor rotation Tie-bar system ( only 10 seconds for 14 cavities samll bottle production) 4).Injection clamping adopts the structure of three oil vats and small supply-oil case, hence the speed of open / clamping will be quicker and the bearing pressure of mould will be more equally. 5).Adopt six-pole motor, lower noise, lower energy consumption 6).Special thickness of working platform is made of QT material, excellent mechanics function, difficult to distortion. 7). More language operation system, English, Spanish, Portuguese etc. intelligent micro-computer control sytem, flexible hanging arm constructure, which assure machine operation conveniently. 8). Very bigger mould installation size with enough clamping force, to meet client lots of output requirment, such as for 3ml-30ml,80000 pcs per day, Usually longer 50mm in mould length than similar type of other suppliers. Give client possible favor to meet bigger output requirment. l Product Features 1).It produces more finished bottles per cycle per hour without deflashing and trimming. 2).It has been designed to make plastic bottle containers with exacting weight,size,volume tolerance and quality. 3).The weight of the product can be pre-set.Excellent mechanical strength, impact –resisting and non-cracking. 4).There is no joint seam at the bottom, and the bottle strength is improved accordingly. 5).The joint seam on the bottle body is smooth
IB45 Injection Blow Molding Machine
No | Item | Data | No. | Item | Data | No | Item | Data |
1 | Dia. Of Screw | 45mm | 8 | Idle time | 6 S | 15 | Wastage of cooling water | 5 m3/h |
2 | Max. theoretical capacity | 227 cm3 | 9 | Max Mould size L *W | 530*390 m m | 16 | Outline size L* W* H | 4100*1300*2350 mm |
3 | Heating power of cylinder | 10 kw | 10 | Min. mould thickness | 240 m m | 17 | Machine weight | 6 T |
4 | Heating control section | 3 qty | 11 | Main motor power | 22 kw | 18 | Range of formability product | 15-800 ml |
5 | clamping force 0f injection mould | 450 KN | 12 | Pressure of hydraulic | 14Mpa | 19 | High of formability product | 165 mm |
6 | Clamping force 0f blow mould | 60 KN | 13 | Pressure of compressed air | 1.0 Mpa | 20 | Dia. of formability product | 100 mm |
7 | Opening stroke of mould | 120 mm | 14 | Wastage of compressed air | 0.5 m3/h | 21 | Total power | 35 kw |
COMPANY DOOR
CE CERTIFICATION
MACHINE IN DOMESTIC SHOW CHINAPLAST
MACHINE IN OVERSEA EXHIBITIOIN
MACHINERY DELIVERY
MACHINE IN CLIENT'S FACTORY
Machine running