hydraulic foam machine for spraying polyurea coating

Polyurethane Spray Machine  Features:

1. Hydraulic supercharging device, with small volume, light weight, low failure rate, simple operation, easy operation and other great features;

2. adopting the most advanced ventilation method, guarantee equipment working stability to the maximum; 

3. minimizing spraying congestion with multi-feedstock device;

4. multi-leakage protection system to protect the safety of the operator; 

5. equipped with emergency switch system, help operator deal with emergencies rapidly;

6. great 380v heating system enables rapid warming of raw materials to the best state, speeds up normal operation progress;

7. digital counting system can understand original consumption timely;

8. humanized design with equipment operation panel, super easy to get the hang of it; 

9. the latest spraying gun has great features like small volume, light weight, low failure rate, etc;

10. lifting pump adopts big change ratio method, the winter also can easily feed raw materials high viscosity

Polyurethane Spray Machine Equipment applications:

1. Insulation & Coating: external wall insulation, internal wall insulation, roof, cold storage, ship cabin, cargo containers,trucks, refrigerated trucks,tank, etc.

2. Casting: solar water heaters,tank insulation, cabin, insulation board, security doors, refrigerators, pipes, road construction, packaging, road construction, wall insulation, etc.

Equipment Standard Configuration:

Main machine: 1 set

spray gun: 1 set

lifting pump: 2 sets

barrel connector: 2 sets

heating pipe: 15 meters

spray gun connector: 2 meters

accessories box: 1 set

instruction book: 1 copy

Equipment weight: 109kg

Equipment packaging: wooden box

Equipment package weight: 210kg

Equipment package size: 860*860*1630mm

Technical Data:

Power source: 3-phase 4-wires 380V 50Hz

Working power:20KW

Driven mode: pneumatic

Air source: 0.5~0.8 MPa ≥0.5m³/min

Raw output: 3~10kg/min

Maximum output pressure: 24Mpa

AB material output ratio: 1:1

 

Temperature control table: setting and displaying real-time system temperature;

Thermostat switch: Controlling on-and-off of the heating system. When it’s on, the system temperature will cut off the power automatically after the temperature reaches the setting, the light is off at the moment; When the temperature is below the setting, it will activate heating system automatically, the light is on at the moment; If heating is no longer needed, you can manually turn off the switch, the light is off at the moment.

Start / Reset switch:  When you start the machine, making the knob pointing at Start. When the work is done, switching it to the reset direction.

Hydraulic pressure indicator: Displaying the output pressure of A/B material when the machine is working

Raw material outlet: Outlet of A/B materials and are connected with A/B material pipes;

Main power: Power switch to turn on and off of the equipment

A/B material filter: filtering impurities of A/B material in the equipment;

Heating tube: heating A/B materials and is controlled by Iso/polyol material temp. control

Hydraulic station oil-adding hole:When the oil level in oil feed pump is getting low, open the oil-adding hole and add some oil;

Emergency switch: Cutting off power rapidly in emergencies; 

Booster pump: booster pump for A, B material;

Voltage: displaying voltage input;

 

Spray gun :

 

Heating hose :

Installation:

Factory workshop:

Product dispacth 

For more info pls contact me freely:

Email :    henry@hightoptools.com 

Skype:hightophenry

Whatsapp/mobile phone 0086188853736308

QQ:2759285440

 

wechat:18853736308