Specifications 1.Model:MYL2500X40B(Rotary composer )
2.Max.working length: 2600mm
3.Max.working width:1250mm
4.Working thickness:10-100mm
Technical parameters
MODEL | MYL2500X20B | MYL2500X40B |
Biggest Processing Length | 2600mm | 2600mm |
Biggest Processing Width | 1250mm | 1250mm |
Biggest Processing Thickness | 10-10mm | 10-100mm |
Hydraulic Motor Power | 3.75kw | 3.75kw |
The system rated Pressure | 0-8Mpa | 0-8 Mpa |
Rotary Motor Power | 1.1kw | 1.5kw |
Dimensions(lengthXwidthXheight) | 5400 x 4100 x 3700 mm | 6700 x 4100 x 3700 mm |
Weight | 6000kg | 8500kg |
Structural characteristics: The machine mainly consists of fuselage, transmission, pressure board, clamp, sliding bracket, guide rail, electric, hydraulic, and pneumatic components. (1) The fuselage section: use profile welding, good stiffness, simple and reasonable structure, strong stability. (2) Transmission section: by the motor, reducer, coupling, transmission shaft, sprocket and chain, ensure the workpiece run smoothly, and with a reverse self-locking function. (3) pressure board section: consists of cylinder, pressure plate and the sliding frame, ensure that the workpiece surface is flat and level. (4) clamp sets of parts: consists of hydraulic motor, clamp sets, and cylinder of the hydraulic pressure station, when the card set of alignment jig head driven by cylinder rotation card sets of liquid (motor drive) into the jig card head to rotate the fixture screw, driven by wire mother clamp pressure on artifacts. (5) clamp section: consist of bracket, screw, wire mother and push plate, screw drives the wire mother plate movement. (6) Slide bracket: it carries platen and card head moving on the rail. (7) Rail parts: sliding carriage moving orbit. (8) Electrical system: it is made of transformers, contactors, intermediate relays, trip switch and proximity switch group into the electric control system. See 2.3 (9) Pneumatic system: it is made of the joint, cylinder, valve, reversing valve, speed regulation and tracheal element composition and so on, pressure can be adjusted according to actual requirements, by clamp motor and beams finish working. (10) Hydraulic system: consists of motor, hydraulic pump, hydraulic valve, hydraulic motor, to complete the workpiece clamping and loosening of the action. Our Product