Hybrid Solar Inverter with Built in MPPT Controller and AC Charger

Hybrid Solar Inverter with Built in MPPT Controller and AC Charger

Key features:

To inverter:


High overload ability up to 300% rated power (20 sec)
Low voltage trip selectable (9.5V/10V or 10V/10.5V) extracting max power from various batteries with different protection
Low quiescent current, power saver mode to reduce power consumption to 10W (3 sec sensing cycle)/3W (30s sensing cycle)
DC13V battery recover point, dedicated for solar systems

To solar charger:


MPPT function with high efficiency 97%
Auto input DC voltage detect between 12V/24V
Reverse current protection, battery temperature compensation


To battery charger:


3 step intelligent battery charging (bulk, absorption, and float)
8 pre set battery type (flooded lead acid, gel, or absorbed glass mat (AGM) batteries) selector plus de-sulphation for totally flat batteries
Powerful charge rate up to 90A, selectable from 0-100%
PFC (Power Factor Correction) for charger, less power consumption than conventional units

To transfer:


10ms typical transfer time between battery and AC, guarantees power continuity
15s delay before transfer when AC resumes, extra protection for loads when used with generator
Input AC voltage range selectable (184-253V or 154-253V) for different kinds of loads
30/40A through current ability
Allows start up and through power with depleted batteries

To remote control & others:


Ability to switch the unit on/off, select/deselect power saver mode
17 alarms/warnings, informative for easier operation and trouble-shooting
Front panel LED indicators and adjustable switch selectors
Battery/AC priority switch available for off grid solar/wind system
Low battery, overload, and high battery, over temperature protection circuitry
RS232/USB communication port available
Generator compatible