1 / 6
Model No. : | WER-ES3201I |
---|---|
Brand Name : | WER |
Product description
Model | WER-ES3201I Eco solvent printer | ||
Print Technology | Drop-On-Demand Piezoelectric technology | ||
Print heads | 1 PCS DX7 print-head | ||
Print Width | 3200 mm | ||
Acceptable Media Width | 3300 mm | ||
Ink type | Eco solvent ink | ||
Cartridge | Type | Only use special cartridge for compatible Eco solvent ink | |
Volume | 440cc * 2/color or 880cc/color | ||
Color | 4 Color: CMYK | ||
Color Express Force | 16.7 Million | ||
Print Resolution | Optional: 540 × 720dpi, 720 × 720dpi, 720 × 1440dpi, 1080 × 1080 dpi, 540 × 1080dpi, 540 × 360 dpi. | ||
Print speed | Normal quality | 17.5 m2/h (360*1440dpi, 4pass) | |
Standard quality | 13 m2/h (720*1080dpi, 6pass) | ||
High quality | 8.5 m2/h (720*1440dpi, 8pass) | ||
Media type | PP paper, Backlit film, PVC vinyl, one way vision, photo paper, transparent PVC film, wallpaper etc. | ||
Media Operation | Automatic feeding media structure, cutting and draw in | ||
Take-up mode | Clockwise or anticlockwise | ||
Print-head Cleaning | Automatic & manual control cleaning system | ||
Safe Cover | Automatic offline function’s safe interlocking device | ||
Interface | USB2.0 | ||
Heat system | Front, Middle, back | ||
Instruction Language | RD-RTL,RD-PJL | ||
Power usage | Max 1400VA | ||
Power input | AC100V/220±10 % | ||
Dimension (L*W*H) | 4660mm*960mm*1250mm | ||
Gross weight (With Stand) | 550KGS | ||
Operation Environment | Temperature: 18 ~ 28 °C; Humidity: 50 ~ 80 % (no freezing |
DX5 Printhead | |
Instruction: Epson DX5 Resolution: 1440DPI | |
Color: 4 colors | |
Print mode: 4, 6, 8, 12 Pass | |
Notes: | |
A: Operators need to make antistatic treatment, please wear the Anti-static devices if permission, to prevent the high static load from burning the circuit board inside print head. | |
B: During installation, try not to directly touch the surface of print head. |
Eco solvent printer main board | |
Introduction: EPSON DX5 and DX7 eco solvent printer main board. | |
Usage: Send printing data signal, control the operations of main parts. | |
Notes: | |
A: Resist dirt and moisture for the main board. | |
B: Turn off the power when check the main board. Mark the plug signal line and supply line to avoid connection mistake which can burnout the main board. | |
C: Please do not break or weld the spare parts on the main board personally. |
Eco solvent printer print head board | |
Introduction: | |
EPSON DX5 and DX7 eco solvent printer print head board. | |
Usage: Receive printing data signal and control inkjet and voltage of the print head. | |
Notes: | |
A:Resist dirt and moisture for the print head board. | |
B: The print head cable must be inserted into the right place; otherwise it may burnout the print head. | |
C: Please do not weld or dismount any spare part on the print head board personally. |
Sheet feeder | |
Introduction: Auto-feed, keep the material tension balance, make the material pass through the print platform smoothly and do nice printing work. | |
Notes: | |
A:. When printing materials, rigidly fix the material and sheet feeder shelf. | |
B: Try to put the material in middle of the platform, make the material get equal force by the roller, so it can pass through the print platform smoothly. | |
C:Keep a clean and tidy environment surrounding the sheet feeder; do not interfere with the feeding process. |
Ink cartridge | |
Introduction: 2 Liter ink cartridge, provide the ink continuously which is very convenient. Ink color is clear, so it is not easy to add the wrong color ink. | |
Notes: | |
A: Make sure each color ink to the corresponding ink cartridge. | |
B: It is enough when the ink reaches 3/4 of the cartridge. | |
C: Be careful not to dirty machine and ground when add ink; seal the lid on time after add ink. |
Suction and heating device | |
Introduction: Automatic suction when printing which can make the print materials adsorb to the platform better, so the heater can heat and dry the printed material more evenly. | |
Notes: | |
A: Keep the suction plate clean and tidy. | |
B: Adjust the suction strength before printing, as well as proper heating temperature. | |
C: Do not touch the heating plate when printing. |
Send your inquiry to this supplier