Hot Sale Professional Welder Used for Aluminum Metal Welding ALUTIG-250HD
Product Description SPECIALIST FEATURE • DC+/DC-: Improved TIG starting. Now starts DC(-) to maintain a sharp tungsten.
• Lift-Arc start provides AC or DC arc starting without t • he use of high frequency.
• Adjustable AC output frequency allows the operator to focus the arc minimizing the heat affected zone.
• Extended AC Balance Control helps maintain a pointed tungsten to direct the arc in the weld joint.
• Independent amplitude/amperage control allows EP and EN amperages to be set independently to precisely control heat input to the work and electrode.
• Multiple Waveshapes:
Standard Squarewave for fast travel speeds and excellent puddle control;
Soft squarewave for a soft buttery arc with maximum puddle control and good wetting action,;
Sine wave for a traditional softer sounding arc;
Triangular wave to reduce the heat input into the weld at low amperage.
• MIX TIG: we can get an excellent Arc Concentration, can be carried out the excellent welding performance from thin to thick plate. TECHNICAL SPECIFICATIONS
Item No | ALUTIG-200HD | ALUTIG-250HD |
Rated Input Voltage | 1PH ~ 230V ±15% | 1PH ~ 230V ±15% |
Max. Load Power Capacity | TIG: 5.63KVA | TIG: 7.81KVA |
| MMA: 6.60KVA | MMA: 8.75KVA |
Rated Duty Cycle(40oC) 60% | TIG: 200A/18V | TIG: 250A/20V |
| MMA: 160A/26.4V | MMA: 200A/28V |
100% | TIG: 160A/16.4V | TIG: 200A/18V |
| MMA: 130A/25.2V | MMA: 160A/26.4V |
Welding Current/Voltage Range | TIG: 5A/10.2V~200A/18V | TIG: 5A/10.2V~250A/20V |
| MMA:20A/20.8V~160A/26.4V | MMA:20A/20.8V~200A/28V |
Open Circuit Voltage | 70V~80V | 70V~80V |
Power Factor | 0.8 | 0.8 |
Efficiency | 80% | 80% |
TIG | Pulse | Peak Current | 5A~200A | 5A~50A |
Base Current | 5A~200A | 5A~250A |
Pulse Frequency | 0.2Hz~200Hz | 0.2Hz~200Hz |
Pulse Width (Ratio) | 1~100% | 1~100% |
AC TIG | AC Frequency Range | 20Hz~250Hz | 20Hz~250Hz |
AC Clean Width (AC Balance) | +40~-40 | +40~-40 |
AC Clean Ratio (AC Bias) % | +30~-50 | +30~-50 |
MIX TIG | MIX Frequency: | 1Hz~5Hz | 1Hz~5Hz |
DC Balance: (%) | 20-80 | 20-80 |
Arc-starting Current | 5A~200A | 5A~250A |
Crater-filling Current | 5A~200A | 5A~250A |
Current Up-slope Time | 0.1S~15S | 0.1S~15S |
Current Down-slop Time | 0-15S | 0-15S |
Pre-Gas Time | 0-15S | 0-15S |
Flow-Gas Time | 0-15S | 0-15S |
Spot Arc Time | 0-10S | 0-10S |
MMA | Arc Force | 10A~160A | 10A-200A |
Hot Start Time | 0.1~3S | 0.1~3S |
Hot Start Current | 10A-160A | 10A-200A |
Dimension (LxWxH) | 540X240X480mm | 540X240X480mm |
Weight (KG) | 23KG | 23KG |
MIX TIG CONTROL
Features of MIX TIG: The AC current can get a very good clearance, and DC current can get a deeper penetration. Use the MIX TIG we can get anexcellent Arc Concentration, can be carried out the excellent welding performance from thin to thick plate. 1) Nice weld appearance, deep penetration. 2) Excellet Arc Concentration. | | MIX TIG Frequency (Hz): the cycletime of MIX TIG in 1 second. Adjustable range: 0.1-10Hz. | | MIX TIG Balance (DC) %: DC Balance (%) = (tad/Tmix) x 100 | | AC WAVESHAPE CONTROLS |