Video
1 / 6
Options:
Model No. : | XCUR-M5120 |
---|---|
Brand Name : | Xuchuan |
place of origin : | China |
Suzhou, Jiangsu, China
Product description
Hot Melt Textile Adhesive Product description
XCUR-M5120 is one-component, moisture-reactive polyurethane hot melt adhesive. It can be used for the composite of breathable fabrics.
Characterristic and application
Characterristic: Long operation time for resin, low operation temperature, low operating viscosity, fast curing speed, strong initial adhesion、strong positioning ability, high peel strength, and washability.
Application: Liquid Polyester Polyol Can be used for leisure clothing and waterproof clothing composites.
Processing advice
1. Processing temperature: 85~105℃;
2. Processing humidity: 50~70%, if you need to speed up the curing speed, you can increase the ambient humidity properly;
3. Curing environment temperature: 25~35℃;
4. Since PUR hot melt adhesive is a moisture curing type polyurethane resin, so it must be stored in a sealed bag, if exposed to moisture, the surface cures to form rubber and the viscosity increases dramatically;
5. After opening the bag, it is recommended to use it as soon as possible, but it should not be exposed to the air for a long time;
6. Shelf life:6 months.
Cleaning
1.Use waste cloth to wipe nozzle or barrel to remove excess PUR hot melt adhesive;
2.Add special PUR detergent to mix with unreacted PUR hot melt adhesive for 5~10 minutes.
Precautions for use Polyester Polyol For Adhesive
1.When using, personnel should take good protective equipment to avoid high temperature scald;
2.The product contains a small amount of isocyanate, in order to avoid prolonged exposure to allergy symptoms, please use in a well-ventilated environment.
Xuchuan chemical established in 2007, company registered capital is RMB 500 million. The main products a
Video
Suzhou, Jiangsu, China
Send your inquiry to this supplier