High Speed 4 Color Flexo Printing Machine for Plastic with PLC Touch Screen

GYT4800 Flexo printing machineI. Control part: 1. The whole machine equipped with the microcomputer control. 2. The main motor 2.2kw euipped with the inverter which is adjustable speed motor. 3. Even ink 0.75 kw motor to run ink separately. 4. PLC touch screen make operation more easier. 5. Digital camera with cupboard to catch and display static picure of products. It enlarges ten times of priting products when the machine running at high speed. So it's easy to inspect the printing quality. II. The unwinding partDouble working station in unwinding. 02 pieces of 5kg /N magnetic powder braker, and with 01 pieces of auto tension control. 3 inch air shaft axisSimulated EPC which was in place of the photo epc so that it can tracking the color accuracy and correct. III. The printing partPneumatic lifting and lowing plate, auto lifting plate when the machine is stopped. After that can run ink automatically. When the machine is opening, it will make alarm to start the auto lowering plate printing. Bevel gear longitudinal register device. ± 20 transverse register. The ink transmitting is made by the steel anilox and the rubber roller, pressing scape the ink. Adjust the ink pressure and the press printing pressure. V. Drying part1. Intellegent temperature controller to control the temperature. 2. Centrifugal blower to bring the wind. VI. The winding partDouble work station on windingWith 5kg Newton magnetic powder clutch manual control the tension.