high quality double roll crusher with over 20 years experience

high quality double roll crusher  with over 20 years experience

Introduction of roller crusher:
In the mining industry, roller crushers are used to crush mines of medium or low hardness, rocks that have low or medium rigidity during mine selection, for cement, chemicals, and industrial production of building materials, among others. However, their use in the mining industry has greatly declined due to their inability to produce large amounts of output. In mining applications, the roll crusher does not match up to cone crushers, when considering the volume of production and maintenance costs. However, roll crushers have the advantage of producing a close distribution of the product size. In cases where the ore is not very abrasive, the maintenance costs are significantly reduced.
Theoretically speaking, the maximum reduction ratio of roll crushers is 4:1. For example, the smallest size that can be recognized by a particle of 2inches is 1/2 an inch. Using this machine, a material is crushed and reduced to a minimum particle size of 10Mesh (2mm). The materials are crushed by compression between two rolls rotating about a shaft. The size between the two rolls used for compression can be suitably adjusted according to the desired size of the end-product. It is important to note that the largest particle size of the materials inserted should not be more than four times the dimension of the gap.
The rotation of the two rolls draws the particles to be crushed into the gap forming a friction angle between the rolls and particles referred to as nip angle. Through forcing the materials between the gaps, the rolls create compressive forces causing the materials to fracture.

Features and Applications of roll crusher:
Roll crushers have the advantage of producing an end-product that is has a fine size distribution and they produce little dust or fines during operation. They are widely used for crushing minerals whose abrasive levels are low and in the small scale production of mine. Roll crushers are mostly used during coal mining. The crushers used may either be single roll or double roll. When used in coal mining, the surface of the rolls will have teeth or raised forms (when used for mineral and metal ores, the rolls have a smooth surface).
The roll crushers are capable of producing between 100 and 120 million bricks per year. They are widely used in the production of facing bricks, paving bricks, hollow and thermal bricks.

Applicable material of roll crusher:
1) Clay
2) Shale clay
3) Coal gangue
4) River silt
Hour output: 150m3/h

Working principle of roll crusher:
Adjustable output granularity: There are wedge-shaped or gasket regulating device between the two rollers, the top of wedge-shaped device is adjustment bolt. The wedge tips active roller away from the fixed wheel when adjustment bolt pulls wedge upward. At this time, up, wedge will the space between the two rollers becomes larger, output granularity becomes larger. When the wedge is down, the gap of the two active rollers becomes smaller under the action of the compressing spring, particle size becomes smaller. Gasket regulating device adjusts the size of particle through increasing or decreasing the quantity or thickness of pads. The gap of two rollers becomes large when increasing gasket. The gap of the two rollers becomes smaller when reducing gasket output granularity becomes smaller.

Main Technical Parameters:

Specification and type	Feeding size (mm)	Discharging size (mm)	Capacity(t/h)	Motor Power (kw)	Weight（kg）
2PG-400×250	≤25	1-8	5-10	11	1500
2PG-610×400	≤40	1-20	13-35	30	4500
2PG-750×500	≤40	2-20	15-40	37	12250
2PG-900×500	≤40	3-40	20-50	44	14000

Note: The technical parameters above are just for your reference. If there is any change, all parameters and overall dimension are subject to operating instructions. Any questions please feel free to contact us.