High-Performance Scraper type Self-cleaning Filter

  ACS series of automatic cleaning control systems to control the HPS-CF filter for efficient operation. If it is necessary, can also be customized to achieve DCS remote real-time monitoring. ACS control system with differential pressure transducer or timing cleaning control function, the function of self-cleaning by differential pressure is suitable for most occasions, is the most efficient cleaning mode, the pressure difference indicated the status that the internal surface of filter element is blocked or how is the filter cake. The Self-Cleaning Control System will begin to run when the pressure difference is reach to the set value, the self-cleaning process will be operated, it is recommended to clean when the pressure difference is 0.05MPa, and, it can be adjusted in the 0.01-0.1MPA range according to the operating conditions. The timer can be set between 0 and 24 hours. If the pressure mode is disabled, the time mode is still active and can be used as the final protection. The cleaning cycle should be set to the average period of differential pressure cleaning mode.

HPS-CF Series filters are equipped with top quality V-SLOT filter element that Its mesh screen is wedge-shape mesh ( V-shaped), the filter element is made of precision metal, it has the following outstanding advantages:

◆ Accuracy range 50-500 microns

 ◆ Accurate gap width, the tolerance is less than 5 microns

 ◆ The material of body is 316L, strong corrosion resistance

◆ Vshaped gap, not easy to be blocked by the impurities, maintain a stable flow in long term

◆ The outer surface is smooth, the impurities is easy to scrape, and, the wear of scraper is minimal

◆ Some troublesome impurities can also be filtered, such as: sludge type impurities, soft caking impurities

◆ The surface with a special hardening wear-resistant treatment, to extend the service life

◆ high-strength structure, the mesh screen is not deformedcan wear the high-intensity positive and negative pressu