High Lift Stages Centrifugal Mineral Processing Sludge Pump

Shijiazhuang NaiPu pump co.ltd is direct factory of slurry sludge pump , there are horizontal and submersible centrifugal mineral processing sludge pump.

Horizontal Centrifugal Sludge Pump

Metal Liner Mineral Processing Sludge Pump NA TYPE

1.5/1B-NA 2/1.5B-NA 3/2C-NA 3/2CC-NA 4/3C-NA 4/3CC-NA 4/3D-NA 4/3DD-NA 6/4D-NA 6/4DD-NA 6/4E-NA 6/4EE-NA 8/6E-NA 8/6EE-NA 8/6F-NA 8/6FF-NA 8/6R-NA 10/8ST-NA 10/8F-NA 10/8FF-NA 12/10ST-NA 12/10G-NA 12/10F-NA 12/10FF-NA 14/12ST-NA 14/12G-NA 14/12FF-NA 14/12F-NA 16/14TU-NA 20/18TV-NA

Horizontal Mineral Processing Slurry Pump Performance Parameters

Type	Allowable Mating Max. Power(Kw)	Clear Water Performance					Impeller
		Capacity/Q m³/hr	Head/m	Speed/rpm	Max Efficiency/%	NPSH/m	Nos of Vane	Impeller Diameter/mm
1.5X1-NP-NA	15	12.6--28.8	6--68	1200--3800	40	2--4	5	152
2X1.5-NP-NA	15	32.4--72	6--58	1200--3200	45	3.5--8	5	184
3X2-NP-NA	30	39.6--86.4	12--64	1300--2700	55	4--6	5	214
4X3-NP-NA	30	86.4--198	9--52	1000--2200	71	4--6	5	245
6X4-NP-NA	60	162--360	12--56	800--1550	65	5--8	5	365
8X6-NP-NA	300	360--828	10--61	500--1140	72	2--9	5	510
10X8-NP-NA	560	612--1368	11--61	400--850	71	4--10	5	686
12X10-NP-NA	560	936--1980	7--68	300--800	82	6	5	762
14X12-NP-NA	560	1260--2772	13--63	300--600	77	3--10	5	965
16X14-NP-NA	1200	1368--3060	11--63	250--550	79	4--10	5	1067
20X18-NP-NA	1200	2520--5400	13--57	200--400	85	5--10	5	1370

Feature and Application:

Naipu® NP-NA(R) series centrifugal slurry pumps and spare parts can fully interchange with world famous brand.These pumps are of heavy-duty construction, designed for continuous pumping of highly abrasive and corrosive slurries. They feature a wide choice of replaceable abrasion resistant metal or moulded elastomer casting liners and Impellers, which are all interchangeable within a common casting assembly.

 

1.Double Liner Centrifugal Pump

2.Rubber or high chrome alloy impeller

3.Large flow in medium head

4.Drive type:ZV CV DC CR CL

5.Types of 4 seal to prevent leakage:Packing Seal # Expeller Seal # Mechanical Seal # Dyna Seal

 

Typical Applications---

Minerals Flotation Processing

Electric Factory Coal Preparation

Coal Washing

Chemical Medium Processing

Effluent Handling

Salt and Sugar Industry

Sand And Gravel Handling

Horizontal Slurry Pump Constructure

Submersible Sludge Pump

 Centrifugal Mineral Processing Submersible Sludge Pumps are mainly used to pump high-hardness, strong-corrosion and high-concentration liquids that contain suspended solid particles, such as finished ores, refuse ores, ashes, cinders, cements, mud, mineral stones and et

  Centrifugal Mineral Processing Submersible Sludge Pumps is a new type of high efficiency anti-abrasion pump . In the hydraulic design, structural design and wear-resistant materials used, the advantages of the same kind of products at home and abroad are comprehensively applied and innovated, with high efficiency and energy saving, small vibration, low noise, reliable operation, long service life, easy maintenance and other characteristics.  
Because the pump inlet is installed with a stirring wheel, the mud at the bottom of the inlet can be stirred up and pumped out at work; Reduce the sedimentation of the sewage pond (or mud pond), ensuring the effective volume of the sewage pond.

Description

Discharge  Size : 80  to 400mm

Power: Motor

Flow rate : 25m3/h -2000 m3/h

Head : 12-60m

Material : High Chromium Alloy A05

Feature

Compare with common mud pumps and slurry pumps, Small Submersible Sludge Pumps enjoy the characteristis as follows:
 
 ♣ Submersible Work without influence of suction head.
 ♣ No assistant vacuum pump, save your investment.
 ♣ No noise, keep the silence of your work station.
 ♣ With agitator, no need extra stirring devices, more convenience for operating.
 ♣ It do not need to build pump house
 ♣Directly works on the surface of the slurry , with more efficiency to delivery slurry 

Submersible dredging pump application conditions

1— Power: 50/60HZ, 380V/460V/660V, 3-Phase.
2— Medium Temperature: Max. 40°C and without explosion gas.
3— Slurry Concentration By weight up to 60%.
4— Max submersible depth: <20m
Min submersible depth: >1m
5— Type of installation: Vertical (recommend) or as
customer’s requirement
6— Continuous operation

Performance 

Construction Drawing

 

 

Submersible Pump Parts

 

NaiPu Main Pump

1. NAH , HH  L Horizontal Slurry Pump
2. SP Vertical sump pump
3. ZJQ Submersible slurry pump
4. G Horizontal sand gravel pump
5. ZJQ Submersible sand pump
6. WS Dredging pump
7. AF Vertical Froth Pump
8 .AHF Horizontal Froth Pump
9. TL(R) Desulphurization Pump
10.Clean Water Pump
11. OEM Casting machinery wear parts 

Welcome to Contact me