Heavy Duty Vertical Machining Center, Linear Guide Vmc Machining Centers

1. Type: CNC Vertical Machining Center, VMC machining center.
2. Guideway Type: Linear Guide Way.
3. Spindle Type: Direct Driven Spindle.
4. System: MITSUBISHI / FANUC Controller.
5. Number of axes: 3 / 4 / 5 axis.
6. Table size: 500*350 mm.
7. Spindle speed: 50-12,000/15,000 rpm.
8. Function: Heavy Cutting,Milling,Drilling and Tapping,High Speed Madding And Engraving.
9. Dimension (L*W*H): 1650x2000x2000 mm.

 

Heavy Duty Vertical Machining Center, Linear Guide Vmc Machining Centers

 

Digitally controlled drives combined with linear guide ways lead to short positioning times with the highest degree of precision. CNC controls with your choice of Mitsubishi or Fanuc, allow you to finish your work piece in the shortest possible time.The HS-430HD is small size machine with enhanced fast speed processing ability. This goal is achieved by spindle speeds of 10,000-24,000 rpm, high rapid traverse speeds of 48m/min-60m/min. and tool magazine with a double gripper for tool exchange times of 1.6 seconds. The sturdy, cast-iron C-frame design ensures maximum rigidity and provides the basis for high milling precision.

 

 

Table size: 500*350mm

Travel of X/Y/Z: 450*300*450 mm

Rapid traverse X/Y/Z: 48/48/48 m/min

Spindle speed: 12,000 rpm / 15,000 rpm (Direct driven)

 

 

Specifications:

 

Item	HS-430HD	Unit
X Axis Travel	450	mm
Y Axis Travel	300	mm
Z Axis Travel	300	mm
Table Size	500x350	mm
T-slot Size	3x18x110	mm
Max. Load on Table	250	kg
Spindle Taper	BT-30	#
Spindle Speed	50-12,000/15,000	rpm
Spindle Nose Table Surface	160-460	mm
Spindle Center to Column Surface	360	mm
Spindle Power	5.5(7.5)	kw(HP)
Spindle Torque	35	N.M
X/Y Axis Rapid Traverse	48,000/48,000	mm/min
Z Axis Rapid Traverse	48,000	mm/min
X,Y,Z Feed Rate of Cutting	1-10,000	mm/min
3 Axis Motor Power	1/1/1.5	kw
Max. Tool Weight	4	kg
MAX. Tool Length	250	mm
Max. Tool Diameter	75/150	mm
Positioning Precision	±0.005/300	mm
Repeating Positioning Precision	±0.003/300	mm
Controller	MITSUBISHI / FANUC / SIEMENS
Coolant Tank Capacity	120	L
Pneumatic Source Requirement	6-7	kg/cm2
Power Requirement	15	KVA
Machine Weight	3,100	kg
Machine Size	1,650x2,000x2,000	mm

 

 

Options Accessories available:

 

1. MITSUBISHI / FANUC Controller

2. 24-tool changer / 16-tool changer,

3. Chip conveyor screw type / linear type

4. Belt-drive spindle (10,000rpm) / direct-drive spindle (10,000rpm/15,000rpm see model HS-650HD)

 

 

Competitive Advantage:

• Linear-guide machining center featured with high-speed and high-precision direct driven spindle.
• Standard accessories includes full guarding, oil-water separator and spindle cooling system
• Direct driven spindle machine center has a high speed spindle. These machines have a good performance of high smoothness in finishing process.

 

Featured with:

Full guarding: The sealed roof complies with environmental requirements ensuring oil mist during the processing won’t bring air pollution to the workshop.

Spindle cooling system: Research show that spindle cooling system can well protect the spindle during fast speed rotation or long time processing from generating too much heat.

 

Oil-water separator: This separator ensures that lubricating oil and cutting fluid can be separated to keep cutting fluid clean. This can also prolong service time of the cutting fluid and help the work piece surface clean and bright.