Hands touch sensor operated brass faucet kitchen tap pull out

Specifications Hands touch sensor operated brass faucet kitchen tap pull out

1.Brass faucet kitchen

2.Friendly & Safe

3.No-lead Brass

3.CE

TCK Premium Products Hands touch sensor operated brass faucet kitchen tap pull out   Two ways activation: Touch sensor and mechanical manual   Responds to You
Touch the brass faucet kitchen tap of 360 angles to start the flow of water. To turn the water off, simply touch the brass faucet kitchen tap body, again.   Handle
Hands-free mode works at any time, even when the handle is in the off position.   Consistent Performance
The handle on the side of the brass faucet kitchen tap offers familiar, manual operation, allowing you to adjust temperature and water flow.   Water temperature and flow are adjustable Hands free activated brass faucet kitchen tap Improves water and energy efficiency
Easy to use – ideal for disabled or elderly
Hygienic – reduces risk of cross-contamination
Mains and battery powered options included
Vandal resistant faucet kitchen
Easy to fit in new installations or retrofits Product Pictures:                                                                                                                                 Product Specification:                                                                                                                   

No.	Product description	Hands touch sensor operated brass faucet kitchen tap pull out
1	Power supply	DC:6V(4 x AA alkaline batteries) AC:220V-240V/50Hz or AC110V/60Hz
2	Power consumption	Static≤0.3mW;Active≤3W
3	Battery life	108000 flushes(4 x AA alkaline batteries)
4	Sensor field	05-35cm (adjustable)
5	Water pressure	0.05~0.8MPa
6	Ambient temperature	0~55°C
8	Working life	350000~400000 times
9	Sensor time	<1 Sec
10	Closing time	<2 Sec
11	Low voltage indication	3.9V(The light will flash twice each two seconds)
12	Self shut-off time	65-70 Sec (Non stop flushing)

Company Profile:                                                                                                                                 Hands touch sensor operated brass faucet kitchen tap pull out OLT have been designing and manufacturing brass faucet kitchen tap and flushing devices operated by infra-red sensors, capacitive and micro-wave technology, which has been marketed all over the world. Our wide range of products include Innovative single handle faucet ,automatic wall-mounted and deck-mounted brass faucet kitchen tap, automatic flushing valves for urinals and toilets, and a variety of electronic components, which are suitable for commercial and domestic application. We are today’s leading producer and supplier in China of the above products, and all our products are CUPC, WRAS, CE, ISO9001 and ISO14001 certified, while most of them are nationally patented.   Production Line:                                                                                                                               We have four production lines in our workshop:1,sensor,2,control box 3,body assemable,4,testing. So far,we are the biggest production capacity manufacturer in automated sanitary ware feild including brass faucet kitchen tap Packing Detail:                                                                                                                                 We provide different packings for your selection:Neutral paper box or customized box. 1) regular standard packing 2) foam based packing 3) Paper holder packing   Hands touch sensor operated brass faucet kitchen tap pull out Company Equipement:                                                                                                                     To supply the qualified brass faucet kitchen tap products, OLT is equipped with different necessary equipments to make sure all the material and production are 100% satisfication.  1)Acid Salt Spray Testing 2)3D printer 3)RoHS material testing  4)Air leakage testing 5) High /low temperature testing for electronic components 6)Precision instrument 7)Life testing   Hands touch sensor operated brass faucet kitchen tap pull out  Product Approval:                                                                                                                              Our product, especially brass faucet kitchen tap, have been marketed worldwidely, mainly to EuropeMost of our models are Cupc,CE,Wras,Watermark Certified. To meet our different customers' requirement, We provide different water flow areator,various approval hoses and material to meet the market.   Hands touch sensor operated brass faucet kitchen tap pull out  Our Strength:                                                                                                                                      Competitive prices and high quality Hands touch sensor operated brass faucet kitchen tap pull out
More products to choose from Instant communication and update Dliever on time  Inspect product material and function fully before delivery Cupc,Upc,Wras,Watermark,Ce and IS0 90001 certified Friendly staff and reliable service  Discounts on bulk orders and deliveries available Main OEM AND ODM manufacturer of brass faucet kitchen tap item The other hot sales products:                                                                                 We strive to provide cutting edge technology in the pursuit of sustainable water management. It is our objective to offer international standard quality and service to ensure total customer satisfaction.   For more information about Hands touch sensor operated brass faucet kitchen tap pull out, please feel free to visit our website: www.oltsw.com.   Easily Mantainance CARE AND CLEANING OF CHROME AND SPECIAL FINISHES                                                                                          DO NOT USE abrasive or chemical cleaners (including chlorine bleach)  to clean classic brass faucet kitchen tap that may dull the luster and attack the chrome or special decorative finishes. Use ONLY mild soap and water, then wipe dry with clean cloth or towel. While cleaning the bathroom tile, protect brass faucet kitchen tap from any splattering of cleaner . Acids and cleaning fluids will discolor or remove chrome plating. Easily Install 01 1. PRIOR TO INSTALLATION:                                                                                                                Prior to installing the Automatic brass faucet kitchen tap, install the items listed below. Also, refer to the appropriate rough-in diagram. • Plug-In Adapter for AC/AC+DC Models Install electrical receptacle(s) for plug-in adapter(s) — 220 VAC, 1 amp service for each 6 VDC plug-in adapter used. International models may be supplied with a 220 VAC/VDC transformer. • Hot and cold water supply lines or tempered water supply line • Drain lines International models are supplied with 1/2” G water connections. 2. Water Supply Pipe:                                                                                                                            Before installing the brass faucet kitchen tap, be sure to thoroughly flush away any foreign matter such as dirt and sand trapped in the water supply pipe. (before connecting copper tube(s) or flex hose(s) to supply stop(s),flush all water lines prior to making connections) 3. Tools Required For Installation:                                                                                                      • Electric drill for drilling anchor holes • Straight blade and phillips blade screwdrivers • Open end wrenches (9, 11, 13, 16, 22 mm) Faucet Rough-In                                                                                                                                            1A: INSTALL FLEX HOSE AND MOUNTING STUDS                                                                                  A  Install Mounting Stud,                 B  Install Flex Hose 2A:INSTALL SPOUT, TRIM PLATE AND SPACER                                                                                    2B:INSTALL SPOUT                                                                                                                                       A: Apply a bead of plumbers putty around the outside of the brass faucet kitchen tap underbody. (Plumber's putty is a pliable substance used to create watertight seals around brass faucet kitchen tap and drains. The putty is considered one of the basic plumber tools and is often used any time plumbing fixtures are replaced) 3A;INSTALL RUBBER GASKET, RETAINER, AND RETAINER NUT(S)                                                      Secure faucet kitchen tap to the Deck by installing Rubber Gasket, Retainer and Retainer Nut(s). Tighten Retainer Nuts securely. Do not over-tighten. 4A:INSTALL CONTROL MODULE IN AN APPROPRIATE LOCATION (SEE ROUGH-INS)                        A, Using Control Module as a template, mark mounting holes on wall. When installed, Sensor Cable and Flex Hose need some slack. B, Drill 1/4” (6 mm) hole at each mounting hole location. C, Install Plastic Anchors (supplied) into mounting holes in wall. D, Install Control Module to wall using Fasteners supplied.   4B: CONNECT SENSOR CABLE AND WATER LINES TO CONTROL MODULE                                   4-1,Connect Water Line (supplied with INTL Mode only) to Supply Stop and Control Box. 4-2,Connect Flex Hose (from brass faucet kitchen tap ). 4-3,Connect Sensor Cable (from brass faucet kitchen tap ). Note: Do not use the pipe thread sealand. 5: INSTALL BATTERIES                                                                                                                          5-1,Loosen Cover Screws and remove Cover from Control Module 5-2, Remove Battery Compartment, remove compartment lid using screwdriver and install four (4) AA-size batteries (supplied) as indicated by the (+) and (—) symbols inside the Battery Compartment. Replace compartment lid and tighten with screwdriver. 5-3, Reinstall Battery Compartment into the Control Module.   5-4, Reinstall Control Module Cover using all four (4) Screws. 6:CONNECT ADAPTER (ADAPTER POWERED MODELS ONLY) AND TURN ON WATER SUPPLY         6-1,Plug Adapter Jack into Control Module. 6-2, Plug Adapter in Receptacle. 6-3 Turn on Water Supply. 7: TEST FAUCET OPERATION                                                                                                                7-1, Place hands under brass faucet kitchen tap. Solenoid valve should “click,” LED in sensor window should blink once and water should flow from the spout. 7-2, When hands are removed, the water flow should stop.