Search
Sign In Join Free
1 / 5
Hand push type electric lift
Get Latest Price
Send Inquiry
| Brand Name : | dajun |
|---|
Ji'nan army lift machinery Co., Ltd.
You might also like
Product description
Electric lift platform car is a kind of multi-function crane loading and unloading machinery, and its electric lifting platform lifting system is to rely on the hydraulic drive. Shear fork mechanical structure enbles that the lifting platform has a higher stability; wide operating platform and a high load capacity, enbles a greater range of operations at high altitude, and for many people simultaneously. It makes the high air work more efficient, safer and more secure.
1 lift platform in the factory have been tested and debugging, the technical indicators meet the design requirements, the use of power, hydraulic, electrical system is not required to adjust.
2 platform before using the hydraulic, electrical system, no leakage or leakage phenomenon can be used.
3. Lifting platform when in use, the four supporting legs should be firmly supported on solid ground (to walk round will be off the ground is quasi) if necessary, the use of the sleeper.
4 lifting platform air operation 1-3 times before the load operation.
5 the center of the load should be located in the center of the working table.
6 protective railings on both ends of the movable door should be closed to the rear of the lock can work.
7. When used, will be back to oil valve knob in a clockwise direction to tighten, the manual valve handle is pushed in a neutral position, start the motor make the system work, and the reversing handle is pulled to the lifting position, lifting platform to reach the required height so that the reversing handle is pushed to the neutral position, lifting platform stop rising, at the same time to shut down the motor can work. When it is down, release the return valve (counterclockwise rotation) platform can be reduced by weight. (Note: motor can not be reversed)
8 when using a manual pump, the first return valve knob clockwise tightening, the handle pushed to the neutral position, the pressure on the handle platform can rise. Dropped when the return valve platform fell.
Electric lift table
1 wheel, shaft and bearing, cylinder pin shaft and bearings, boom hinge shaft and bearings are worn.
2 all parts are filled with a number of lubricating oil, to extend the service life of the bearing.
3 hydraulic oil oil and oil. The lifting platform whole rises, in this position, the hydraulic ground should be higher than the 40 to 50 mm. If the hydraulic oil is found to be dark, sticky or gravel, etc., should be replaced promptly (32# hydraulic oil).
1 lift platform in the factory have been tested and debugging, the technical indicators meet the design requirements, the use of power, hydraulic, electrical system is not required to adjust.
2 platform before using the hydraulic, electrical system, no leakage or leakage phenomenon can be used.
3. Lifting platform when in use, the four supporting legs should be firmly supported on solid ground (to walk round will be off the ground is quasi) if necessary, the use of the sleeper.
4 lifting platform air operation 1-3 times before the load operation.
5 the center of the load should be located in the center of the working table.
6 protective railings on both ends of the movable door should be closed to the rear of the lock can work.
7. When used, will be back to oil valve knob in a clockwise direction to tighten, the manual valve handle is pushed in a neutral position, start the motor make the system work, and the reversing handle is pulled to the lifting position, lifting platform to reach the required height so that the reversing handle is pushed to the neutral position, lifting platform stop rising, at the same time to shut down the motor can work. When it is down, release the return valve (counterclockwise rotation) platform can be reduced by weight. (Note: motor can not be reversed)
8 when using a manual pump, the first return valve knob clockwise tightening, the handle pushed to the neutral position, the pressure on the handle platform can rise. Dropped when the return valve platform fell.
Electric lift table
1 wheel, shaft and bearing, cylinder pin shaft and bearings, boom hinge shaft and bearings are worn.
2 all parts are filled with a number of lubricating oil, to extend the service life of the bearing.
3 hydraulic oil oil and oil. The lifting platform whole rises, in this position, the hydraulic ground should be higher than the 40 to 50 mm. If the hydraulic oil is found to be dark, sticky or gravel, etc., should be replaced promptly (32# hydraulic oil).
Supplier's popular products
Send your inquiry to this supplier
Send Inquiry
Product Alert
Subscribe to your interested keywords. We will send freely the latest and hottest products to your Inbox. Don't miss any trade information.
Subscribe
Your use of this website constitutes acknowledgement and acceptance of our Terms & Conditions.
Copyright © 2009-2024 Bossgoo Co., Ltd. All rights reserved.
