Half round aluminum gutter equipment

Hlaf round aluminum gutter equipment

gutter is made of pre-paint galvanized steel,aluminum or pre-paint galvalume as raw material.It is used to collecting rainwater.

First of all,

For our roll forming machine,it is customized design.Different designs can be cusotmized as your request.If you are interested in our machine.

We would ask you some questions first.

1) Do you have an idea design you need?Including measurement.If pls tell me where are you from.So we can send you some popular designs at your place.

2) What is material thickness u use?Max and Min?

3) What is hardness of material?Is it standard?Or full hard?

4) What is voltage of machine u need?380V,50HZ?220V,60HZ?OR 415v,50HZ?We can make is as your request.

We supply different kinds of roll forming machine:

Roof Panel Roll Forming Machine

Gutters prevent water goes into the fabric of the building by channelling the rainwater away from the exterior of the walls and their foundations.Gutter forming machine can make k tyle gutter or half round gutter.One machine can not make all designs.

Our gutter forming equipment can use aluminum,copper,or color coated galvanized coil as raw material.

1.Main parameters of gutter machine:
  Parameters of raw material

Decoiling →  Roll Forming  →Hydraulic cutting→Collecting table
2.Photos of Machine:
 
  
3.Technology parameters:
The weight of machine is about 5.2 tons.The total dimension of machine:8700(L)*600(W)*1200mm(H)
3.1Manual decoiler:
Capacity of uncoiler:5tons 
Expansion of segment:Manual 
Rotation of segment:Manual  
Number of segment:4
Range of segment expansion:480-520mm 
Operation method:Manual  
Qty: 1
3.2 Guiding system:
To keep the material straight
Entrance and adjustable wheel: 2rolls
Qty: 1
3.3Main forming machine:
Coil thickness:0.4-0.7mm 
motor type: 3 phase asynchronous motor 
Main motor power:5.5kw+4kw(normal speed),
Approx.22groups roller including correction rollers
Roller : S45C with quenching treatment,Shafts  of rollers are tooled by grinding machine for two times to ensure the precision of final product.

Shaft:Diameter of max shaft: ø60mm(hardening and tempering)

Transmission type:by one inch chain

Qty: 1
3.4 Hydraulic cutting:
Material of blade: Cr12Mov,HRC58-62
Length measuring: Automatic encoder length measuring 
Type of cutting:Cutting after forming:Cut the sheet after roll forming to required length.No need to change mold for different sizes
Cutting motion:The main machine automatically stops and the cutting will take place.After the cutting,the main machine will automatically start.     
Power of motor:3kw     
3.5 Product support frame 
Size: L 3m x W0.5m