Specifications 1.High quality Gum kneader.
2.Best Gum making machine.
3.Kneading,crushing,dispersing.
4.Viscos fluid kneader.
5.Gum kneader
Gum kneader Alias: Gum Kneader machine,Gum Kneading machine / Z blades mixer/Σ blades mixer /Rubber kneader /Vacuum kneader/ Vacuum kneading machine.) How to select: Example:NHZ-100L NHZ means the Kneader series,100L means the design volume is 100 liter,0.1tons. The effect volume is about 60%~70% of the design volume.
Model | Cylinder volum(L) | Drive motor power (KW) | Stirring speed (rpm) | Discharge mode | Heating |
Full volume | Feeding amount | Paddle fast / slow paddle | | |
NHZ5 | 5 | 3 | 2.2-4 | 75/50 | Turn cylinder | Hot oil | Power | Steam |
NHZ20 | 20 | 12 | 3-5.5 | 63/42 | Turn cylinder |
NHZ50 | 50 | 30 | 4-7.5 | 63/42 | Turn cylinder |
NHZ100 | 100 | 60 | 5.5-7.5 | 43/29 | Turn cylinder |
NHZ200 | 200 | 120 | 7.5-15 | 43/29 | Turn cylinder | Bottom pumping | Screw the material |
NHZ300 | 300 | 180 | 11-18.5 | 43/29 |
NHZ500 | 500 | 300 | 18.5-30 | 43/29 |
NHZ1000 | 1000 | 600 | 22-55 | 32/22 |
NHZ1500 | 1500 | 900 | 30-90 | 32/22 |
NHZ2000 | 2000 | 1200 | 45-110 | 32/22 |
Remarks: 1,Temperature range: 0-300° 2, Pressure range:-0.1-0.6MPa |
Applications: 1.Gum making industry, Gum mixing & kneading. 2.Adhesives:DOW Corning, Silicone sealant, sealant base, Hot melt adhesive. 3. Rubber:chewing gum, Silicone Rubber, RTV rubber, liquid silicone,etc. 4. BMC(bulk molding compounds),CMC,Graphite, city well cover,batteries. 5. Plastics, PP, PE &Resin mixing processing. 6. I.e.the Kneader suit for all the liquid-solid,solvent, Very High viscosity fluid polymerization or mixing industry. Character: 1.The gum kneader is an ideal equipment, which design for mixing, kneading, crushing, dispersing mainly in very high viscosity plastic materials & viscous fluid. 2.The kneading mechanism is classified into three types:vacuum, pressure and normal atmosphere. 3.The heating/cooling system consists of jacket outer coil pipe.The heat transfer media can be chosen by thermal oil, steam or water. 4.The discharging mode are:hydraulic cylinder turning, bottom ball valve or screw extrusion. 5.There are variety of equipments can be installed for stroke control,safety control, measurement, temperature Pt-Rh sensor,etc. 6.In default the steel is SUS304+Q235.The motor capacity will be selected according to the viscosity of the material. 7.Other issues will be designed according to the best solution.
Contact Information