General Use Fire Separations / protection Wall Boards

Cost-effective Magnesium Oxychloride Exterior Wall Board

Main Characters
–Resist sink
–Fire Prevention
–No Dust
–Damp-proof
–Durable in use
–100% no Asbestos
Thickness:10mm 15mm 20mm

Size:1200*2400mm/1220*2440mm

Packaging & Shipping

1.Strong plywood pallet
2.Strapped with PET rope 
3.Protect corner & edges 
4.PE film covered on the 6 surfaces

We'll go through related detections before goods delivered from factory as following: Density,Flexural strength,Moisture content,Water absorption,Screw holding force,Chloride ion(below picture for example).

Installation (Flooring, Wall and Ceiling)

Cut MgO with a carbide tipped scoring knife or a power saw equipped with a carbide blade. For best results, use a blade designed specifically for cement board and use a T-square to help ensure cuts are straight and even.

For circular cuts and irregular angle cuts use a Roto Zip, Dremel, or equivalent tool, equipped with a cement board bit or carbide tipped bit.

Start with proper framing and ensure studs are straight and square to allow for adequate fastening surface at adjoining walls and flat stress-free installation of MgO. Ensure framing is level.

The fewer cuts that are made the better and easier installation will be. Begin by laying out your floor before fastening to the joists. When planning the layout make sure the cut edges will be against the perimeter of the room. Sheets should be spaced evenly and butt tightly.

Install MgO on 16” centers. Always support board ends by joists. Slightly countersink each fastener. Leave about 1/8th inch between the perimeter walls and the MgO to allow for expansion.

After installing the initial sheet of MgO flooring, apply a generous amount of Select Construction Adhesive, or equal, to the exposed edge of the installed sheet of MgO. Install the next sheet of flooring butting joints together tightly. Squeeze a small amount of well-bonding construction adhesive the surface along the entire seam. Use a putty knife to remove excess from the butt joint. After installation of first board, verify the board is level before continuing.

--Why Choose Us--

* Self-developed Automatic MgO Board Production Line 
* Excellent Customized Ability 

   We can customize boards based on customer needs.

* Perfect free sample (customer needs to pay the freight only)

   We are confident to provide you with good quality testing samples,which will lead you to place a trail order.
* Fast and stable delivery time

   As for one 20ft/40ft container’s goods,the lead time is about 21-28 days.

If you have any inquiries pls contact us immediately!

Shandong Lanchuang Economy & Trade Co.,Ltd.

Add:Rm314,#1Building,Yiqu,Liangzhuangxinqu,Jianshe Road,Jinan,Shandong,China.

Tell:0531 85188790    

Fax:0531 85188391

Email: info at sdlceat.com