G.T.POWER 606-D 1-6 cells Li-Polymer Digital RC Balance Charger

Specifications 1.G.T.POWER 606-D 1-6 cells LiPo Li-Polymer Digital RC Balance Charger

2.Individual voltage balancer for Lithium batteries

Features -Optimized operating software
When charging or discharging, It has an `AUTO` function that sets the feeding current automatically. Especially for Lithium batteries, it can prevent the over-charging can lead to an explosion by users fault. Every program in the unit is controlled with mutual links and communication for every possible error so it introduces a maximum safety. These can be set at users option. Special recharge plugsport for receiver, transmitter and igniter charger. And for frequently used charger port such as multi purpose crocodile pin etc. It provides most convenient balance charge port for Lithium batteries, with separated 3,4,5,6 charge port, and external reverse connector. -High-power and high-performance circuit
It employs the circuit that has maximum output power of 50W. As a result it can charge or discharge up to 15 cells of NiCd/NiMH and 6 series of Lithium batteries with maximum current of 6.0A. Furthermore the cooling system is so efficient that can hold such a power without any trouble of running the CUP or the operating program. -Individual voltage balancer for Lithium batteries inside
It has an individual-cell-voltage balancer inside. This does not require any extra balancer separately when charging Lithium batteries (Lilo/LiPO/LiFe) for cell voltage balancing. Balance individual cells on discharge
It also can monitor and balance individual cells of the Lithium battery pack during the discharge process. If the voltage of any one cell varies abnormally, the process will be stopped with the error message. Accept various types of Lithium battery
It can accept three types of Lithium batteries - Lilo, LiPo and LiFe. They have different characteristics by their chemistry. You can select any one of them that you are going to process before the job. For their specifications, refer `Warnings and safety notes` section.?

Product Details -Operating Voltage Range: DC 10 - 18V, AC in: 100 - 240V, 50/60Hz
-Circuit Power: Max. 50W for charging, Max. 5W for discharging
-Charge Current Range: 0.1 - 6A
-Discharge Current Range: 0.1 - 1A
-Current drain for balancing Li-po: 300mAh/cell
-NiCd/NiMH battery cell count: 1 - 15 Cells
-Li-ion/Polymer Cell Count: 1 - 6 Series
-Pb Battery Voltage: 2 - 20V
-Dimensions: 135mm x 149mm x 40mm
-Packet Includes: Multifuctional Connector Item Packing -G.T.POWER 606-D LiPo Li-Polymer Digital Charger  X 1 -English Manual x 1