Product description
Product Description
CE approved roof insulation panel
Thickness: 20mm~100mm,
Density: 38~50kg/m3,
Normal color: Blue and pink.
1. CE approved roof insulation panel
XPS is an extruded polystyrene insulation manufactured through a plastic extrusion process. The resulting boards are almost 100% closed cell, strong, highly moisture resistant and easy to cut and shape.
XPS is particularly indicated for places where a high mechanic resistance is required. Its resistance to water and compression make it the ideal insulation solution for extreme conditions. Moreover, it is very easy to install and offers a high performance thermal insulation for your building.
2. Installation procedure of the roofing insulation
Seep 1 Existing concrete bases should be mechanically prepared removing all traces of existing finishes, contamination, etc., to expose a clean surface.
Step 2 Install the waterproof layer.
Step 3 The XPS foam Board should be bedded onto the waterproof layer using a flexible cement-based adhesive to avoid the movements of the XPS board in the next phase. Since there is almost no deformation, it is not necessary to stay the joints for expansion. When meet the sudden higher or lower place, the XPS foam board can be cut accordingly.
Step 4 Install the GEO-textile sheet between the finisher layer and the insulation board. The purpose is to separate and protect the insulation board. While for XPS foam board, because it has stable performance and anti-aging, this step can be omitted.
Step 5 Install the finish layer. For walking roof, the finish layer normally is made of fixture embedded into cement mortar. And for no-walking roof, the finish layer is normally made of Gravel, cement brick, cement tile etc.
3. Technical data sheet of the XPS foam board:
Productivity |
CBM/day |
250 |
Density |
Kg/m3 |
35~65kg/m3 |
Length of the board |
mm |
< =6000mm |
Width of the board |
mm |
< =1200mm |
Thickness of the board |
mm |
6~100 |
Color of the board |
|
Normally pink and blue |
Density |
Kg/m3 |
38~40 |
Thermal conductivity, 90 days, 10° C |
W/mK |
0.027~0.03 |
Compressive strength at 10% deflection or yield, (vertical) |
kPa |
≥ 300 |
Tensile strength |
kPa |
≥ 300 |
Water absorption |
Vol-% |
< =1.00% |
Capillarity |
nil |
nil |
Coefficient of linear thermal expansion |
mm/mK |
0.07 |
Temperature limits |
° C |
-50° C, + 75° C |