Film Coating Machine (BG-150E)

Use:
This product was developed on the imported equipment in 1992 and had been placed on the list of the Sin-tech Spark Project of Zhejiang. In 1995, this product passed the provincial level technical appraisal of new products, was awarded the Wenzhou Scientific and Technological Improvement. Award and also recommended as the Brand-new and Quality High-tech Product of Zhejiang and National New Product of 1995.In July 2002,it passed GMP appraisal by State Economy & Trade Committee and the certification of EU. Until now it has been exported to such regions as Europe, Australia, South America, Middle East, Middle Asia, south Asia and Southeast Asia, etc. And it can be widely used for coating various tablets, pills and sweets with organic film, water-soluble film and sugar film etc. In such fields as of pharmaceutical, food and biological products etc. And it has such characteristics as good appearance in design, high efficiency, low energy consumption and small floor area, etc.
 
During the film coating process in the major machine, it shows such feature dust fly off, no syrup splash, operation condition improvement, little cross contamination to tablets, simple coating process, coating time shortening as well as high production efficiency etc. There adopted a new & mini-type computer and a touch screen on which temperature and negative pressure control system are displayed with such functions programmability, automatic adjusting such a majority of process parameters flow, negative pressure, intake, exhaust, temperature, rotational velocity the compile of SOP digitizing, making no difference between various batches products with the same technical parameter. It adds data storage and printing functions with more than 14 program film coating , which are modified at any time in the run. The printing device finished as to the customers\' requirement so that the process parameters process flow of each batch of production can be accurately recorded and domestic advanced level. The users may write batch numbers and the codes products on their needs.
 
Performance and characteristics:

1.The coating boiler equipped in the high pressure spray gun, there set a cleaning sprayer at the air exhaust exit and hot air mouth, which can be rotated in automatic and full direction ,without dead corner more convenient to clean. (Option)

2. Select the imported spray gun. It\'s convenient to operate and easy to master and flexible controlled technological requirement. The spray gun head requirement must keep in the range of 0.29 Mpa to 0.39 Mpa. Angle and sector can be adjustable , uniform density and particle in spray pressure and 0.4-0.5Mpa in atomization pressure that avoid the dropping leakage and blockage phenomenon of size, uniform atomization and large spray area, practical to adjust flow, free leakage and blockage, angle and sector.

3. Film coating machine contains the mechanical device of cauldron wrapping little material can coat at least 20~40kg plain pills in 150 type coating machine, regulate through it inherent machinery, make a small mount of medium coat in cauldron and will not cause the wasted of dressing and greatly improve the scope of appliance.
 
Filtration Hot Air Cabinet
Firstly, air inhaled in through the centrifugal fan should be purified up to the 100,000 Level after three times filtration, involving primary filtration, medium filtration and high filtration, then be blown to the drum of main machine through the (steam or electrothermal) .Equipped with a vibration damper. Equipped with primary filtration device in the air inlet.
 
Dust-removal Exhaust Cabinet
Used for exhausting air out of drum in the major machine ( including dust absorption), keeping the working area under negative pressure. Equipped with a vibration damper. The exhaust outlet is equipped with a reflux-proof device. Close the exhaust cutlet before stop the machine to prevent the air in the exhaust cabinet from reflux. It is equipped with dust abatemert & filtration by vibration. so the vibration and dust are insulated, the dust is stopped from fly off and the dust abatement is automatically separated, which makes easy.
 
Agitating and Holding Tank (Electric-Heating)
Thermal stirring drum adopts electric heating type. It is equipped with pneumatic stirrer which is driven by compressed air, stable rotating speed and stepless speed regulating, medium can be stirred homogeneous. It can be controlled automatically at normal temperature to 80℃, easy-operating, safe and reliable. All parts are made of stainless steel, inside and outside is mirror polished.
 
Basic working principle:
The tablets in drum make complicated and constant track movement with easy and smooth turn frequent exchanging in a clean and closed drum of the film coating machine. The coating mixed round in the mixing drum are sprayed on tablets through the spray gun at the Inlet un action of the peristaltic pump. Meanwhile under the action of air exhaust and negative pressure 100,000 clean hot air supplied by the air exhaust cabinet is exhausted from the fan at the sieve meshes through tablets. So these coating mediums on the surface of tablets get dry forming a coat of firm, fine and smooth film. The whole process is finished under the control of PLC.
 
Main technical parameter:

Item/Model	BG150E
Load capacity	150kg
Rotation speed of coating pan	1~16rpm
Power of main machine	2.2kw
Diameter of coating pan	φ1200mm
Motor of air exhaust cabinet	5.5kw
Air exhaust flow	7419m³/h
Motor power of hot air cabinet	1.5kw
Hot air flow	2356m³/h
Weight of main machine	850kg
Clean air	Pressure	≥0.4mpa
Air consumption	0.7m³/min
Machine dimension (L×W×H)	Main machine	1570×1260×2030mm
Hot air cabinet	900×800×1935mm
Air exhaust cabinet	950×950×1950mm