Factory brand Conductor rail -crane overhead conveyor

Specifications Inductive Power Transfer/Current small/Mobile speed/Easy assembly/Can make up at will

  Low-Power Insulated Conductor Systems are used for Three-dimensional warehouse,Ring application or slip rings,A diverse array of automated assembly line and more...   Standard application data Nominal Current (at 100% duty cycle) [A]: 100 Nom. Voltage [V]: 600 Rail Length [mm]: 6.000 or 4,000 Outside-Dimensions (Pol) [mm]: 12,0 x 18,0/15,0×15,0 Operating Conditions: for indoor and weather protected outdoor applications Track Configuration: straight / easy onside adaptation to course layout   Mechanical properties: Flexible strength:75N/mm2±10% Tensile strength:40N/mm2±10%   Temperature range: Common Housing:  -30oC up to +60oC BAYBLEND Housing:  -20oC up to +115oC   Combustibility: Flame retardant Self extinguishing:class B 1-no flaming paricles,self-extinguishing.   Resistance to chemicals:+45oC Gasoline:Sulphuric acid 50% Mineral Oil:Caustic soda 25% & 50% Grease:Hydro-chloric acid,concentrated.   Special features High safety level with integrated finger protected insulation Easy and exact mounting with multiple hangar clamps and bajonett conector technology Unlimited amount of pole design for complex Easy installation in courves with bending option Flexible power feed options   Main applications EMS Eleotro monorail systems Stretcher / Packing equipment Amusements rights Ring application or slip rings Stage equipment Sorter     Maintenance --After installation,Make sure that the sliding hangers are straight (in a perpendicular position) after nuts have been tightened to guarantee free sliding of the powerail.The powerail must be installed exactly straight and parallel to the machinery track. --Before running the powerail,Check the system for esay running of the current collector trolleys,i.e.there may be no resistance by an excessively narrow slot or pull by the connecting cable. --Every 3 up to max.12 months,-depending on the frequency of operation and travel distance-,check the carbon brushes and mechanical componets for wear and replace them if necessary.