F8114 industrial gprs ZigBee ip modem

Specifications 1.gprs Zigbee ip modem

2.with standard TCP/IP protocol stack

3.provides data transfer function by public GPRS and ZigBee

                               F8114 gprs Zigbee IP MODEM   F8114 ZigBee+GPRS IP MODEM is a kind of data terminal device that provides data transfer function by public GPRS and ZigBee network.   It adopts high-powered industrial 32 bits CPU and embedded real time operating system. It supports RS232, RS485 (or RS422) and ZigBee port that can conveniently and transparently connect one device to a cellular network, allowing you to connect to your existing serial and ZigBee devices with only basic configuration. It has low power consumption states in which the power consumption could be 1ower than 1mA@12VDC.   It has been widely used on M2M fields, such as intelligent transportation, smart grid, industrial automation, telemetry, finance, POS, water supply, environment protection, post, weather, and so on.   Product Feature ---------------------------------------------------------------------------------------------------------------------------------   Design for Industrial Application u       High-powered industrial cellular module u       High-powered industrial ZigBee module u       High-powered industrial 32 bits CPU u       Support low power consumption mode, including multi-sleep and trigger modes to reduce the power dissipation farthest u       Embedded Real Time Clock(RTC) circuit which can realize timing online/offline function u       Housing: iron, providing IP30 protection u       Power range: DC 5~35V Stability and Reliability u       Support hardware and software WDT u       Support auto recovery mechanism, including online detect, auto redial when offline to make it always online u       RS232/RS485/RS422 ports:15KV ESD protection u       SIM/UIM port: 15KV ESD protection u       Power port: reverse-voltage and overvoltage protection u       Antenna port: lightning protection(optional) Standard and Convenience u       Adopt terminal block interface, convenient for industrial application u       Support standard RS232, RS485(or RS422) and ZigBee port that can connect to serial and ZigBee devices directly  u       TTL logic level RS232 interface can be customized u       Support intellectual mode, enter into communication state automatically when powered u       Provide management software for remote management u       Support several work modes u       Convenient configuration and maintenance interface High-performance u       Support data transfer by cellular and ZigBee network u       Support TCP server and support multi TCP client connection(optional) u       Support double data centers, one main and another backup u       Supply 5 I/O channels, compatible 2 pulse wave output channels, 2 analog inputs and one pulse input counters. u       Support multi data centers and it can support 5 data centers at the same time u       Support multi online trigger ways, including SMS, ring and data. Support link disconnection when timeout u       Support dynamic domain name(DDNS) and IP access to data center u       Design with standard TCP/IP protocol stack u       Support APN/VPDN   Product Specification  ------------------------------------------------------------------------------------------------------------------------     Cellular Specification  

Item	Content
Cellular Module	Industrial cellular module
Standard and Band	EGSM900/GSM1800MHz, GSM850/900/1800/1900MHz(optional) Compliant to GSM phase 2/2+ GPRS class 10, class 12(optional)
Bandwidth	85.6Kbps
TX power	GSM850/900: <33dBm GSM1800/1900: <30dBm
RX sensitivity	<-107dBm

  ZigBee Specification  

Item	Content
ZigBee Module	Industrial ZigBee Chip
Standard and Band	IEEE 802.15.4 ISM 2.4 GHz
Indoor/Urban Range	30m 90m(With PA)
Outdoor/RF Line-of-Sight Range	500m 2000m(With PA)
Transmit Power	2.82 mw (+4.5dBm) 100 mw (+20dBm) (With PA)
Bandwidth	250Kbps
Receiver Sensitivity	-95dBm -104dBm(With PA)
Network Topologies	Point-to-Point, Point-to-Multipoint, Peer-to-Peer and Mesh
Number of channels	16 Direct Sequence Channels
Channels	11 to 26

  Hardware System  

Item	Content
CPU	Industrial 32 bits CPU
FLASH	512KB (Extendable)
SRAM	256KB(Extendable)

  Interface Type  

Item	Content
Serial	1 RS232 port and 1 RS485(orRS422) port, 15KV ESD protection Data bits: 5, 6 ,7, 8 Stop bits: 1, 1.5, 2 Parity: none, even, odd, space, mark Baud rate: 110~230400 bps
Indicator	"Power", "ACT", "Online", "ZigBee"
Antenna	Cellular: Standard SMA female interface, 50 ohm, lighting protection(optional) ZigBee: Standard SMA female interface, 50 ohm, lighting protection(optional)
SIM/UIM	Standard 3V/1.8V user card interface, 15KV ESD protection
Power	Terminal block interface, reverse-voltage and overvoltage protection

  Power Input

Item	Content
Standard Power	DC 12V/0.5A
Power Range	DC 5~35V

  Power Consumption

Working States	Power Consumption
Communication	50-85mA@12VDC, 115-160mA@5VDC
Standby	25mA@12VDC, 45mA@5VDC
Sleep	8mA@12VDC, 18mA@5VDC
Timing Power Off	0.6mA@12VDC, 1mA@5VDC

  Physical Characteristics

Item	Content
Housing	Iron, providing IP30 protection
Dimensions	91x58.5x22 mm
Weight	210g

  Environmental Limits

Item	Content
Operating Temperature	-25~+65ºC (-13~+149F)
Extended  Operating Temperature	-30~+75ºC (-22~+167F)
Storage Temperature	-40~+85ºC (-40~+185F)
Operating Humidity	95% ( unfreezing)

  Field Installation Pictures   1. Zigbee modem F8114 and F8914 for data acquision in weather station