Product description
Omnigrad S -TC65
- Thermocouple thermometer EEx-d certified, no replaceable insert, no thermowell, process connection threaded fixed or compression fitting
- PCP (4...20 mA), HART® or PROFIBUS-PA® electronics
Range of uses
- The Omnigrad S TC65 is an industrial thermometer (thermocouple
- TC: K or J), developed for use in the fine chemicals and
- petrochemical industry but also suitable for generic industrial applications.
- In compliance to EN 50014/18/20 (ATEX certification) it is
- therefore particularly suitable also for hazardous areas.
- When required, it’s also available with a transmitter
- (PCP, HART® or PROFIBUS-PA®) into the housing.
- The TC65 is available in different configurations and characteristics depending on process requirements.
- The installation on the plants normally needed a special process connection as a spring compression fitting.
Application areas
- Fine chemicals industry
- Petrochemical industry
- Light energy industry
- General industrial services
- Environmental engineering
Features and benefits
- Customized immersion length
- Aluminium housing, with protection grade from IP66 to IP68
- Thermocouple with hot junction grounded or ungrounded in mineral oxide cable (MgO cable) diameter: 3 or 6 mm
- Process connection welded or sliding/spring compression
- fitting or std compression fitting
- PCP, HART® and PROFIBUS-PA®,
- (4...20 mA 2-wire transmitters)
- The accuracy of the thermocouple TC (K (NiCr-Ni) and
- J (Fe-CuNi)) are: Cl. 1 - 2 (EN 60584) or Cl. Special - Standard
- (ANSI MC96.1)
- The thermocouple TC (K or J) are available in single or double
- element
- ATEX II 2 GD EEx-d IIC certification
- ATEX II 1/2 GD EEx d IIC certification
Thermocouple thermometer EEx-d certified, no replaceable insert, no thermowell, process connection threaded fixed or compression fitting
PCP (4...20 mA), HART® or PROFIBUS-PA® electronics
The Omnigrad S TC65 is an industrial thermometer (thermocouple
TC: K or J), developed for use in the fine chemicals and
petrochemical industry but also suitable for generic industrial applications.
In compliance to EN 50014/18/20 (ATEX certification) it is
therefore particularly suitable also for hazardous areas.
When required, it’s also available with a transmitter
(PCP, HART® or PROFIBUS-PA®) into the housing.
The TC65 is available in different configurations and characteristics depending on process requirements.
The installation on the plants normally needed a special process connection as a spring compression fitting.
Fine chemicals industry
Petrochemical industry
Light energy industry
General industrial services
Environmental engineering
Customized immersion length
Aluminium housing, with protection grade from IP66 to IP68
Thermocouple with hot junction grounded or ungrounded in mineral oxide cable (MgO cable) diameter: 3 or 6 mm
Process connection welded or sliding/spring compression
fitting or std compression fitting
PCP, HART® and PROFIBUS-PA®,
(4...20 mA 2-wire transmitters)
The accuracy of the thermocouple TC (K (NiCr-Ni) and
J (Fe-CuNi)) are: Cl. 1 - 2 (EN 60584) or Cl. Special - Standard
(ANSI MC96.1)
The thermocouple TC (K or J) are available in single or double
element
ATEX II 2 GD EEx-d IIC certification
ATEX II 1/2 GD EEx d IIC certification