1 / 1
Model No. : | YG6 Brazed Tip |
---|---|
Brand Name : | Chenhui |
Product description
ISO Code | Grade |
Typical Property Value |
Performance and recommended applications |
Density hardness Bending Strength (g/cm3) HRA (N/mm2) | |||
P05 | YT30 | 9.5 93.2 1200 | High wear resistance but lower strength and impact toughness. Finishing of carbon steel and alloy steel.for instance fine turning,fine boring and fine reaming of their small chip sections. |
P10 | YT15 | 11.3 92.5 1550 | Wear resistance higher than YT5, but impact toughness lower than YT5. Semifinishing of the medium chip sections of steel,cast steel and alloy steel or finishing of small chip sections. |
P20 | YT14 | 11.4 91.8 1650 | High strength and good impact &shock resistance.Rough turning and rough milling of carbon steel and alloy steel during continuous cutting or medium to fine turing during intermittent cutting. |
P30 | YT5 | 12.9 90.4 2000 | Best strength and high impact & shock resistance amoung W-Co-Ti alloys but lower wear resistance.Rough turing rough planning and semi-finish planning of carbon steel and alloy steel(including forged steel parts,stamped parts and cast iron surfaces) during inter mitten cutting. |
P10-P20 | YT715 | 11.3 92.5 1500 | High red hardness and wear resistance.Semi-finishing and finishing of alloy steel withhigh strength. |
P10-P20 /M20 | YT758 | 13.3 92.4 2100 | Good hardness under high temperature and good wear resistance.Continuous or intermittent cutting of alloy steel with super strength. |
P20-P25 /M20 | YT798 | 12.3 92.2 1900 | Good toughness and high resistance to themal shock and plastic deformation.Milling of structure alloy steel,tool alloy steel,manganese steel and stainless steel. |
P25-P35 | YT535 | 12.7 90.0 2100 | Wear resistance,red hardness better than YT540 and higher strength,Continuous rough turning and milling ofcast orforged steel. |
P10-P15 | ZP10 | 11.2 92.0 2100 | Higher wear resistance,strength and red hardness,semifinishing and finishing of stel,cast steel,forgeable cast iron and continuous nodular cast iron.Also suitable for profiling,threading and milling. |
P15-P20 | ZP20 | 11.5 91.8 1650 | Higher impact resistance and strength,Roughing and semifinishing of steel.cast steel,forgeable cast iron and nodular cast iron. |
P20-P30 | ZP25 | 12.6 91.0 1850 | Good toughness.Rough turning,milling,planning and depth hole drilling of carbon steel.cast steel,manganese steel and alloy steel. |
P30-P40 | ZP35 | 12.7 91.0 2220 | A versatile grade,high red hardness,strength and resistance to impact and themal shocking.Roughing and strong cutting of steel and cast steel. |
M10-M20 | ZP30.2 | 13.1 92.8 1800 | High wear resistance and high resistance to plastic deformation.Continuous or intermittent cutting of manganese steel and stainless steel. |
M10 | YW1 | 13.4 92.8 1700 | High red hardness,resistant to impact load.A versatile grade.Machining of common steel,cast irons and hard to machine materials such as refractory steel,manganese steel and stainless steel. |
M15 | YW2A | 13.0 92.0 1950 | High red hardness and high strength,resisting high impact load.A versatile grade rough.Maachining and semi-fingshing of cast irons and hard to machine materials such as refractory steel,manganese steel,stainless steel and advanced alloy steel. |
M20 | YW2 | 13.3 92.0 1800 | High wear resistance,strength comparatively higher and resistant to high impact load.Roughing and semi-finishing of common steel,cast irons as well as refractory steel,manganese steel,stainless steel and advanced alloy steel. |
K01 | YG3X | 15.2 93.6 1450 | Best wear resistance among W-Co alloy yet impact toughness comparatively low.Hifh speed finishing of small chip section of cast irons,non-ferrous metals &their alloys,hardened-steel and alloy steel. |
K10 | YG6X | 14.9 92.5 2100 | High wear resistance and higher,strength,machining of chilled alloy cast irons and refractory alloy steel or finishing of common cast irons. |
K10 | YG6A | 14.9 93.0 1850 | Good wear resistance.Semi-finishing of chilled cast iron,nonferrous metals & their alloys;Semi-finishing and finishing of hardened steel,alloy steel. |
K15-20 | ZK20 (YG6) | 15.0 91.1 2100 | High wear resistance and better,impact and shock resistance higher than YG3X.Semi-finishing and finishing of cast irons,non-ferrous metals & their alloys and nonmetallic materials at medium cutting speed. |
K30 | ZK30 (YG8) | 14.7 90.0 2100 | High strength and good,impact and shock resistance,but wear resistance and cutting speed comparatively lower.Roughing of cast irons,non-ferrous metals& their alloys as well as nonmetallic materials at low cutting speed. |
K20-K40 | ZK30UF | 14.4 91.7 2800 | Superior toughness and high hardness.Finishing and rigid milling of cast irons and non-ferrous metals,ideal for hole-machining tools. |
Send your inquiry to this supplier