Emergency LED traffic light led warning road flare police supply with Stronger magnetic

 New product: Emergency LED traffic light led warning road flare police supply with Stronger magnetic (we also called led baton road flare) Model:BL-2088R2 Emergency LED traffic light led warning road flare police supply with Stronger magnetic Feature: Emergency led traffic warning lights
police equipment
emergency led signal flare
led powerful magnet
roadway safety light   Emergency LED traffic light led warning road flare police supply with Stronger magnetic Model number: BL-2088    Develop by NINGHAI BOLI ELECTRIC FACTORY --- the only manufacturer producing this product, patent number ZL 2010 3 0534147.1 FOR RECHARGE SERIES -- charger one by one! Emergency LED traffic light led warning road flare police supply with Stronger magnetic OPERATION Press the ON/OFF BUTTON on each flare to rotate through the following 5 light patterns:  

#1-Rotate

#2-Ouad Flash

#3-Alternating Blinks

#4-SOS Rescue (Morse Code)

#5-Steady on - high

#6-Off

  Emergency LED traffic light led warning road flare police supply with Stronger magnetic Alternate Operation: To turn off the flare without cycling through the 5 light patterns,press and hold the ON/OFF BUTTON for 2 seconds.One LEDSwill flash five times and then turn off.When ready to operate again,press the ON/OFF BUTTON and it will return to the last flash pattern that was selected before turning off.      

POWER DURATION	RUN TIME
The battery will be fully charged with either charger within 8-10 hours.When fully charged you may expect these run times:
#1-Rotate	5hours
#2-Ouad Flash	10hours
#3-Alternating Blinks	3hours
#4-SOS Rescue (Morse Code)	10hours
#5-Steady on - high	4hours

  Note:The stand-by charging feature allows flares to be kept plugged in when not in use without damage to the battery or unit.Ensures the flares will be charged and ready for use when needed.Flares will keep a full charge for 90 days.
Step of charging:

1> Put the light on ground, back side is upturned.
2> Take out the ellipse charger, put the charger onto the light as photo shows below, there has a + and mark on both of light and charger, face + to + and to -.     3> Connect the USB wire with the ellipse charger, now you can charger the light through the computer USB plug.
4> If you want to charger the light through AC, please connect the AC charger.
5> If you want to charger the light through CAR Plug, take out the AC charger and connect the CAR charger instead. *** When it is succeed charging, the light on ellipse charger is GREEN, and when it is full charger, the light on ellipse will turn RED.
LI battery in recharge series capacity: 700mAH/3.7V
AC charger: input voltage 100-240V, output voltage: 5.5V, out put electricity 450MA
Car charger: input voltage 12-24V, output voltage: 5.5V, output electricity 450MA
Charging time: battery can be fully charged within 2-3hours. Emergency led traffic warning lights
police equipment
emergency led signal flare
led powerful magnet
roadway safety light Emergency LED traffic light led warning road flare police supply with Stronger magnetic