Matters needing attention:
1. The water inside the product received is normal, we will carry out sealing test before delivery.
2. Wait for more than half a minute to re-ignite to prevent tempering and cause cracking.
3. Do not turn off the gun to adjust the door after power-on. If it needs to be turned off, be sure to first turn off the gun valve and immediately disconnect the power.
4. The burning body temperature is extremely high and cannot be touched by hand.
Method of use:
1. First dissolve sodium hydroxide in water to form a saturated solution (Water and NaOH ratio is 600ml add 4g)
2. Pour the liquid into the reactor along the copper tube. The liquid height can be about 3/5.
3. Screw on the copper tube and add 2/3 or more water to the acrylic tube next to it.
4. will open the spray valve
5. Wait for half an hour while powering up, emptying the air
6. ignition can be
7. If you need to shut down, be sure to turn off the spray and then turn off the power.