1 / 2
Model No. : | CSD-02 |
---|---|
Brand Name : | LW |
Type : | Sliding Door |
Product description
Heat insulation sliding door for codl room,Cold storage's major component selects the well-known brands, which ensure the machine with reasonable configuration, steady movement, good insulation function, and low power consumption.
The electrical control section of the cold room is fully automatically controlled by computer, LCD inner temperature of the cold room, available machine time, defrost time, time of fan delay, alarming indicate and various technology parameter. It is easy and convenient to operate.
3. The ice storage is made up of reinforced base plate, sidewall plate, end wall plate and top plate. There is a 100mm-thick insulated layer of polyurethane foam inside the plate.
4. An air cooling system is applied inside to keep the temperature of the ice storage bin at -8 degree, an ideal temperature to keep ice dry and crispy.
dry and crispy.
Features:
1. Door panel: Polyurethane sandwich panel, forged at one time with high-pressure Foaming machine, with better thermal insulation than traditional panel. Various thickness available:75mm,100mm,150mm,200mm
3. Operation: Manual or Motorized types available
4. Good seal: EPDM seal rubber is installed between door leafs and between door leaf and wall. It is of good resistance of cold, chemical and aging.
5. Guide rail: modified-line design. When closing, door leaf will get down and touch the ground. At the same time, it will get closer with the wall to close the gaps.
6. High safety: The door can be easily opened from inside by pulling emergency safety ring in emergency situation.
Thickness of cold room panel
Application temperature
50mm
Temperature 5°C or above
75mm
Temperature -5°C or above
100mm
Temperature -25°C or above
150mm
Temperature -45°C or above
200mm
Temperature -55°C or above
Send your inquiry to this supplier