Electric Crimp Power Tools EM-6B2

Electric Crimp Power Tools EM-6B2

The machine is an ideal crimper for connection in cabinet. It is applicable for pre-insulated terminal crimping from 0.25mm2 to 10mm2 and Cu / Al cutting in 7mm. It is supplied with seven sets of accurate and replaceable die sets. The crimping machine has high working efficiency and wide application.

The machine id driven by fixed speed motor so that it owns advantages of high efficiency and high quality not only in crimping force but crimping speed. it is good for terminal crimping in large or mediem quantity. If there are a lot of different kinds of terminals to be crimped, this crimper is the best choice.

Die sets provided with:

LY03C for crimping insulated terminals          0.5-6mm2      20-10AWG

HS-10 for crimping non-insulated terminals    1.5-6mm2      18-10AWG

HS-101 for crimping non-insulated terminals  1.5-10mm2    18-8AWG

HS-04WFL for crimping wire-end ferrules       0.5-4mm2      20-12AWG

HS-03B for crimping non-insulated tabs and receptacles   1.5-6mm2     18-10AWG

C-C7 for cutting terminals          Cu / Al below 7mm

HS-02H for crimping coaxial cable connector  RG59, RG62, BELDEN 8281, 50 and 75 ohm